Search results

  1. JIffy94

    Best connecting rods??

    I really doubt a rod will go before the block will. The time the rods recieve the most stress is when its going over tdc and the rod literally wants to stretch....putting a blower or turbo on the motor could actually increase a rods strength. Instead of using the crank to draw it down, the...
  2. JIffy94

    Wheel Spacer Saftey

    no worries No worries at all, i do work with a couple people who cant do their job for ****...I have never had a problem getting wheel locks off with an impact gun. The store I work in def would have treated you a lot better than that....If we screw up a stud in any way we will either...
  3. JIffy94

    Wheel Spacer Saftey

    The only spacers we can touch at discount tire are the ones that are torqued down to the original studs and have a new set that you can retorque the wheels on with....If i were to ever run a set of spacers...which i wont...they would be a set like i have described.....They seem to be the safest...
  4. JIffy94

    What else could cause a vibration???

    I had a similar situation on my first transmission. My problem turned out to be a twisted tailshaft. I have no clue how that happened in my car with as little power as it had, but it def did. I had never heard of anyone doin that other than me, replaced it and the vibration was gone. I didnt...
  5. JIffy94

    Y-trim

    Thanks for the responce....I was lookin at this fox nearby that had some extensive mods...the y trim one of them. I was gonna yank it off that car and put it on the 351 in my current fox and turn the other car into my "daily" driverish car. The car ws sick....y trim, baer track system, tko, some...
  6. JIffy94

    Y-trim

    Bump-diggity
  7. JIffy94

    Y-trim

    Is a Y-trim any good. Havent heard much about em...ill assume its an older model that has been updated with a new "code" name....I have heard of YSI trims, but still dont know how good they are...How many ponies can the Y trim handle?
  8. JIffy94

    dss racing 7 qt oil pan?

    I have the Moroso Pan and so does my friend who is also running a 351 setup and we love our pans, cant say a single thing wrong about em. He ordered the miloden one and sent it right back after seeing mine before i put it on. The only pita feature is getting to two of the pan bolts on the rear...
  9. JIffy94

    351W Windsor Motor

    My friend who got the ball rolling for me to do the 351w swap went 12.70's with his combo: rebuilt 351, 10:1 comp, fords n351 cam, edelbrock performer rpm heads, trick flows efi manifold, tko and a set of 4.10's that he now hates. Now you guys may not think those are good numbers but you guys...
  10. JIffy94

    Negative Effects of "Dumps"?

    When i was running pro dumps my car was moderately louder than my flowmaster catback. I def. noticed a huge difference in the way my car smelled after i put my full tailpipes back on, i just cut off the dumps and welded on the tailpipes. I eventually went back to the full flows tho. I used to...
  11. JIffy94

    3.08's to 3.73's How big of a difference is it?

    i went from 2.73's to 3.73's and the first drive was the best part. After that i had to show off to the friends, then it kind alost its hype. I mean dont get me wrong i def felt a difference, but its not something i would hype up about. I think 3.55's should have been the stock gear with auto's...
  12. JIffy94

    Difference between an ATI D-1SC and a P-1SC blower?

    one is straight impeller and the other is helical.
  13. JIffy94

    351 stroker

    Swap Headers, new oil pan and pickup, most likely a new hood, unless you want to do a bunch of other more invlovled things like k-member and such. New intake manifold, either a new or moded midpipe, probably a new tranny. New injector rails. I hear aftermarket 302 headers will work, but i didnt...
  14. JIffy94

    Weird Problem

    May not the be the problem, or you could have already thought of it, but how are the cables? I had to put new cables on mine a couple summers ago cause it didnt ever wanna start consistently. Put new ones on and it cured it, my ground cable was really crappy where it was touching the motor.
  15. JIffy94

    Header swap.. What normal problems?

    i wouldnt take a dremal to the steering shaft, if anything take a good ol hammer and slightly modify(read beat in) one of the primaries that touches the steering shaft, if any. When i had shorties on the 302 i didnt have any problems with the shaft really. I would much rather lose a pony or to...
  16. JIffy94

    rear seat removal question

    No, you dont have to remove any panels. THe only thingi removed was the speaker for temporary so i could stuff the seatbelt up in there. Just unscrew the carpet from the back of the seatrests and undo all the nuts and bolt that hold the black bracket(s) to the seats until its all gone...
  17. JIffy94

    Hydraulic clutch?

    Yes, the 05 was finally the first year of hyd. clutch. Still waiting to see if we can get it to work on foxes tho. It would be pretty sick if it can work.
  18. JIffy94

    when speedo says 140.....

    i will second the 100mph's
  19. JIffy94

    Show us your "RED" Fox Mustangs!

    Hey 9 Deuce GT, that hood stock? I cant really tell from the angle of that one picture, but if its not what is it like a 1.5"? I really wanna keep my stock hood on, but i really wanna put on the whaletail and i think it might look a little goofy with the stocker on. Def wanna stay as low as...
  20. JIffy94

    underhood wires anyone?

    Forgot how to spell mansonozz's name, but there it is he also has one of the sickest bays i have seen on here. I hope mine will turn out like that when i repaint it. Anything close to that and i will be more than happy.
Top Bottom
Back
Forums
Menu