Search results

  1. M

    Time for brakes... a little help please

    pull the calipers off and compress the piston with whatever you want to use,but you might have issues getting the rotors off because i think that year has the parking braker shoes inside the rotor. and if they have been on there for a while they will not come off easy. then its time for a BIg...
  2. M

    low speed stumble issue! some help

    ?
  3. M

    Backfire/misfire problem

    is the distributor set in right?
  4. M

    low speed stumble issue! some help

    not around this area. or do you know any places who stock pro-m meters?
  5. M

    low speed stumble issue! some help

    any ideas of who can tune an EEC processor?
  6. M

    low speed stumble issue! some help

    anyone have any other good ideas?
  7. M

    Timing

    36 degrees total adv
  8. M

    low speed stumble issue! some help

    C&L
  9. M

    low speed stumble issue! some help

    The TP sensor is brand new buts it worth a try
  10. M

    low speed stumble issue! some help

    i agree that it would have a little to much fuel with 30lbs injectors at 46psi, but i do notice the air fuel gauge leaning out when it happens
  11. M

    low speed stumble issue! some help

    The spout is plugged in
  12. M

    low speed stumble issue! some help

    it is an built sportsman block with Z heads,Z cam. Efi with 255 pump and 30lb injectors at 46 psi running, Maf converted, base timming is at 12 degrees
  13. M

    low speed stumble issue! some help

    the car runs fine but when you are at an steady speed/Rpm and you step on it, it hesitates for about 3 sec's than goes away, it sometimes backfires
  14. M

    low speed stumble issue! some help

    i have a new engine i have just fin building and upon driving it i noticed to have a low speed stumble to it with a load. anyone have any ideas?
  15. M

    timming retard for nitrous

    Anyone have any ideas?
  16. M

    timming retard for nitrous

    :shrug: i just finished building a 10:1 CR 302 and i plan to reuse my nitrous setup from the last engine and i wanted to know any good suggestions for timming retarders for nitrous . i am trying to achieve a total of 6 deg. retard on a fuel injection setup.and how dose a retard box work on an...
View older results
Top Bottom
Back
Forums
Menu