Search results

  1. blackink00

    OBD2 code P0357 questions

    well g is the cyl 7 so that would be second one from back on the driver side. switch the coil with another and see if the problem follows to a different cyl. thatll verify its a coil problem
  2. blackink00

    Fuse problem

    those are circuit breakers. do they go up slowly?
  3. blackink00

    Need help with a DTC code.

    the o2 only goes to 1 volt max tho. but yeah most likely its just a sensor. i do those more then anything with that code.
  4. blackink00

    Need help with a DTC code.

    gonna have to monitor PIDS. might have a leaky injector
  5. blackink00

    check engine light

    yup might wanna change the solenoid to cuz that sensor sometimes takes out the solenoid also. pretty common with the sn-95. employee price i paid a lil over 50 bucks for both.
  6. blackink00

    Help! Skipping lifter noise

    lets all bow our heads and hope so. :D
  7. blackink00

    My 20psi dyno session twin turbo 2V

    that whole things is kinda scary lean. usually on FI you wanna run around 11.5 A/F ratio
  8. blackink00

    Help! Skipping lifter noise

    heres a kit. it has alum inserts. ++ BIG-SERT Sparkplug ++
  9. blackink00

    Help! Skipping lifter noise

    i dont off hand but i can get one. all i do is say i need a heli coil kit and the parts counter gives me one. but ive done 2 4.6s with burnt valves cuz of them
  10. blackink00

    Help! Skipping lifter noise

    wow that sucks. i work at a ford dealership and i do about 3 heli coils a week and on some engines that i tear down with burnt valves they have steel heli coils in them. good luck with that cuz now the spark plug that you have in is meant for a specific heat range and now the heat range is off...
  11. blackink00

    2000 Sable Cooling Problem

    give the fan power straight from the battery. see if it turns on or not.
  12. blackink00

    VTEC powered Mustang Spotted in Atlanta! (Hall of Shame Applicant)

    i got one of those on my car :shrug:
  13. blackink00

    VTEC powered Mustang Spotted in Atlanta! (Hall of Shame Applicant)

    i just got pwnd by the red x!
  14. blackink00

    Help! Skipping lifter noise

    make sure you use an aluminum heli coil. so it disapated heat thru the plug. ive seen steel ones burn up valves.
  15. blackink00

    new intake installed on 2000 gt, now terrible hesitation

    pull the plugs and check if you fouled them. its hard to get the modular gaskets to leak.
  16. blackink00

    Wheel spacers don't fit?

    you can either cut the studs down or what i did i bought arp studs that was long and use one single stud through the whole thing.
  17. blackink00

    A MISS!!!@ IDLE

    is the CEL on? just start with plugs and see if it gets better
  18. blackink00

    Need Help!!

    thats good. im good friends with the guys at amp. tom and mike and chris. well glad to hear it worked out.
  19. blackink00

    Need Help!!

    yeah they can reflash it to stock. just say you need a PMI done. what dealership did you take call? i use to work at earnhardt ford and still have some buddy that can help you out. i work at a ford up in salt lake but they can reflash back to stock using as built data. i charge an hour to do...
  20. blackink00

    sluggish idle / check engine light - had codes pulled

    could be a clogged fuel filter or a fuel pump going bad. i would hook up a fuel pressure guage to it and see what the pressure is when its idle and see how bad it drops down. if its the pump make sure you change the filter along with it
Top Bottom
Back
Forums
Menu