Search results

  1. NastE50

    how do I wash my fuel injectors?

    Thanks, I'll use my roomates toothbrush (that bastard)
  2. NastE50

    how do I wash my fuel injectors?

    Im washing my 30lb Accel Fuel Injectors so I can take a picture of them for Ebay. Does anyone know the best way to clean them off? They are supposed to be yellow but they are filthy and dirty. How about soaking them in gasoline? Will that work and is that ok for them?
  3. NastE50

    Oil level sender

    I bought a used stock engine from someone on another forum because I want to put my car back to stock so i can sell it. It is missing its oil level sender and the guy at Autozone was being a jag-off and says they don't carry them. Does anyone know where I could get another one? I don't have my...
  4. NastE50

    Everyone getting a deeper oil pan should read this.

    I'm not as dumb as you are trying to make me look. I just figured the oil pan would come with that pick-up. Its only about 1.5 inches deeper than the stock one. This was after I heated the stock one and bent it so it would fit on with my stud girdle. I asked a few friends of mine and they said...
  5. NastE50

    Everyone getting a deeper oil pan should read this.

    They sound NASTY! I can't wait for all these bugs to be sorted out and to get that PMS system on there. I am also looking for a nice cat-back because I butchered my flowmaster set-up trying to make dumps when I was younger and less intelligent. Anyone have any suggestions? I was wondering, has...
  6. NastE50

    Broken valve cover bolt in AFR head.

    My JB weld idea didn't work. The stuff just turned to powder. Now I am going to try to JB weld a screwdriver into it like you said. Hopefully it wont turn to powder.
  7. NastE50

    Broken valve cover bolt in AFR head.

    Yes, the heads are on the engine. Its just the tip of the extractor that broke off. Its at the way bottom so basically I am dealing with a really big hole right now. I could glob some JB in there and make a ridge at the top where I could use my dremel to make the required cuts for a screw...
  8. NastE50

    Everyone getting a deeper oil pan should read this.

    Oops, I wrote the dipstick that came with my car. I meant the dipstick that came with the pan. I called Moroso the other day about getting the fitting but they are waiting for those dipsticks on backorder til April 24th and I had no luck at any hardware store. I thought the higher volume one...
  9. NastE50

    Broken valve cover bolt in AFR head.

    If you read the other thread about my oil problems, you will see that I have...well, oil problems. My engine is out of my car right now. One source of my oil leaking is my valve covers. I have the AFR 185's on my car and the TFS short valve covers. I am using the blue rubber gaskets from Felpro...
  10. NastE50

    Everyone getting a deeper oil pan should read this.

    I have my engine out for some issues regarding oil. I have a 7 qt. moroso oil pan but I re-used the stock oil pick up tube and a high volume oil pump. DONT DO THIS!!!! My car leaked oil badly and this pump made it even worse! Second, because it drank so much oil and i didn't have the right pick...
  11. NastE50

    Does an Iron 4.6 need torque-plate's to bore and hone?

    My friend has a 2000 GT and he wanted a stroker kit but I told him that I would personally bore it .020" over, stick a Cobra crank in it, some H-beams, and some 8.8-1 pistons in there and feed it with a T-Trim a healthy dose of 12+lbs of boost. He told me that a 4.6 needs to be bored out at a...
  12. NastE50

    PROBLEMS REMOVING RING GEAR AND CARRIER

    I bought an 86 Mustang GT with 5 lug cobra brakes and the whole deal for $1200. It also had a brand new 4:10 gear, brand new traction-lock, and brand new Moser 31 spline axles. I swapped the rear end with my car completely. I am now taking my old 4:10 gear out of my rear end and it is not having...
  13. NastE50

    PROBLEMS REMOVING RING GEAR AND CARRIER

    I bought an 86 Mustang GT with 5 lug cobra brakes and the whole deal for $1200. It also had a brand new 4:10 gear, brand new traction-lock, and brand new Moser 31 spline axles. I swapped the rear end with my car completely. I am now taking my old 4:10 gear out of my rear end and it is not having...
  14. NastE50

    Some spy photos of the APC 05 Mustang Demon kit

    That Wing is Bad as Hell! I don't like the new Mustang, but that wing is making me change my mind very quickly. Some wheels, some HORSEPOWER, and that wing and I might get in on this... :rolleyes:
  15. NastE50

    Which fuel pressure gauge to buy?

    I've been screwing around with my electronic autometer fuel pressure gauge and I am sick of it. Its "cockpit coolness" isn't worth the extra wiring, the price, or the pain in my a$$. I just want a simple fuel pressure gauge I can mount to my AFPR so I can get an accurate reading at an affordable...
  16. NastE50

    2nd Generation Mod Motors!

    You guys ever wonder what is due after this retro body style of the 2005 Mustang? What are they going to go to then. I think it would be in their best interest to base the next one off of the 1987-93 Fox Body GT. A newer version of that bodystyle would absolutely ROCK. (I obviously have a biased...
  17. NastE50

    Trick Flow ADMITS they didn't put a baffle in my INTAKE!!! OIL GUSHING OUT PVC!!!

    sirsureshot39, I LOVE your car man. I think its in my top 10 favorite Mustangs I've seen, keep up the good work! Is your H/C/I setup similar to mine at all and if so, how much boost are you running to acheive that rwhp? I am trying to figure out if I want to go Vortech or Turbo. I hope these DSS...
  18. NastE50

    Trick Flow ADMITS they didn't put a baffle in my INTAKE!!! OIL GUSHING OUT PVC!!!

    I wrote trickflow an email telling them that I would just pay for the part and they didn't respond for 4 days so I called them, talked to a very understanding representative and he told me that the baffle was supposed to be on the lower intake when it left the doors at trick flow. He asked if i...
  19. NastE50

    I got 4 hours left, WILL THESE WHEELS CAUSE ME PROBLEMS ON MY FOX?

    I have seen the 10.5's on Fox Bodies after doing searches. They use the 10.5's from AFS so I am sure they will fit. I have M/T ET Streets on my car right now that measure 26x15x11.5 and with some massaging (ok hammering)to the inner wheelwell, they DO fit with MINOR rubbing on sharp turns. AFS...
  20. NastE50

    I got 4 hours left, WILL THESE WHEELS CAUSE ME PROBLEMS ON MY FOX?

    I AM JUST ABOUT TO HIT THE BUY IT NOW BUTTON, I JUST NEED SOME REASSURANCE. IS THE BACKSPACING OK on these? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7912554520&category=43957
Top Bottom
Back
Forums
Menu