Search results

  1. K

    Help me achieve 300RWHP

    How can i fix the A/F ratio problem.
  2. K

    Help me achieve 300RWHP

    thanks for the info the electric fans. I will look into that. How can i adjust the A/F ratio? And what should i adjust it to.
  3. K

    Help me achieve 300RWHP

    I did take the car to the dyno and basically all they did was advance the timing from 12 to 16*. The guy running the dyno said he didn't want to play with the Fuel Pressure. I think the fuel pressure is at 42lbs. Looking at the dyno sheet the A/F ratio at 2500 is about 15.5 3000- 3500 it...
  4. K

    Help me achieve 300RWHP

    I don't have a specific dollar amount i want to spend as of yet. Just wondering what the possibilities are for me to get to 300. I thought about getting the lower ported but don't know of anyone to do it and also if it would cost 300 to 400 to port the lower i would rather sell the cobra and buy...
  5. K

    Help me achieve 300RWHP

    does anyone know how much HP gain an electric fan is over a stock one. also what about head porting. Need advice on this. Would the torque be comparable between the Edel and the Cobra?
  6. K

    Help me achieve 300RWHP

    As you can see in the sig I am at 279RWHP would like 300 on motor alone. I don't have an electric fan yet, but the car runs so cool with the 3 row radiator and the 180* stat that i can't complain there. Even after back to back passes at the track it ran cool. I also plan on bumping the timing...
  7. K

    Standard roller rocker on ford crate engine?

    how much HP can i expect to gain from the change?
  8. K

    Standard roller rocker on ford crate engine?

    what is the standard roller rocker on ford crate engines? Also can a 1.7 rocker fit with the same valve covers? Is there any HP gain by going to a 1.7? thanks for any info
  9. K

    Attention PA Residents....

    Is the 5000 miles or less for all of Pa or is it just in certain areas. I too am concerned considering when i bought the car the cats were removed and the owner did not have them.
  10. K

    Pennsylvania Tuners/Shops?

    Romeo, there is a shop called CJ Pony Parts that is located between Hershey and Harrisburg on RT. 22. There #is 1-800-888-6473 or website www.cjponyparts.com . They have a nice showroom and can do S/C installations. They installed my engine and other stuff, did an outstanding job very...
  11. K

    1st time at track did awful need help/advice

    I really don't want to go with 4.10's, i know they are good at strip but a friend had them and he nor i liked them on the highway. What is the difference between the 3.55 and 3.73?
  12. K

    1st time at track did awful need help/advice

    hopefully in the spring of next year. However i want to make sure that the traction situation is squared away and i am running better than 14.60's. What are your thoughts on the ET streets vs BFG DR vs NITTO. Also how much difference betweeen 3.55 or 3.73.
  13. K

    1st time at track did awful need help/advice

    Qwk: When i get the Vortech SC what injectors should i run
  14. K

    1st time at track did awful need help/advice

    Thanks for the input. I am going to try to get some stickys before i get back to the track. Are the MAC upper and lower control arms good. I don't know if i want to spend the money on the 24's considering i am hoping to put a supercharger on it next year. Is there anything i could do now while...
  15. K

    1st time at track did awful need help/advice

    What RPM would be recommended with some sticky's. I also have a King Cobra Clutch.
  16. K

    1st time at track did awful need help/advice

    The track was a test and tune for 4 hrs. They are doing it again in June. Thank you for that advice i will look around for more of the test and tune days. yeah my driving was far from perfect.
  17. K

    1st time at track did awful need help/advice

    Maybe not a quarter tank but it seemed to be a decent amount. Reason for going with a full tank was i was unfamiliar with the area and was unsure how close the nearest gas station was to the track. I left the spare in and the sound deading material. Next time i go i will remove both. If i don't...
  18. K

    1st time at track did awful need help/advice

    I went to the track with a full tank of gas and didn't remove anything to lessen the weight. In the 10 passes i used almost a quarter tank. The smog pump is off the car. They were making people go through the water box don't know why? Will launching car at 5000 hurt anything? Where can i get...
  19. K

    1st time at track did awful need help/advice

    Yeah that was rear wheel. It was done at Kauffman Motorsports. They seem to know what they are doing. What would cause the MPH to be down. The only other thing I could think of was the car was bogging when i shifted into 2nd or 3rd can't remember but with all the spinning it was just so frustrating.
  20. K

    1st time at track did awful need help/advice

    What could be keeping my MPH down, any simple changes. Also with that HP what should the MPH be
Top Bottom
Back
Forums
Menu