Search results

  1. ttop88

    Seats?

    Other mustang seats and 300zx are the two easiest. Both bolt right to the stock slides.
  2. ttop88

    Four eyed coupes?

    As of now I have a Anderson cammed 302 with wedge heads a stealth intake running to a t-5. For wheels I have 17x8 and 17x9.5 Boyd smoothies. I have 13" cobra disks front and rear, a set of Eibach springs. Tubed control arms, a full prothane kit with mounts. I have mac long tubes and a pro...
  3. ttop88

    Four eyed coupes?

    It is a carbed 351 86. I am staying carbed and building the car with all spare parts( I have a bunch of parts). Engine and trans are both coming out. Doors and trunk lid are both perfect. Only thing being bought is chassis stiffening. I may build my own street cage for it as well.
  4. ttop88

    Four eyed coupes?

    I have always wanted a four eye coupe(never owned a coupe) I have looked for a very long time and never found one worth what the crazy assed owner wanted for one. I finally found a RUST FREE coupe. It is still wearing whats left of the factory silver paint and has never been wrecked or repaired...
  5. ttop88

    Carb spacer review for the carb guys out there?

    I ran that intake and spacer on my capri and LOVED it.
  6. ttop88

    HELP!!!!

    Where are you from? I think I recognize both cars.
  7. ttop88

    covers

    That must be a state law.....We don't have that one on the books in Indiana
  8. ttop88

    covers

    This one was mine.
  9. ttop88

    86 coupe rear quarter windows

    They bolt in. I think you may haft to elongate one hole.
  10. ttop88

    like dropping anchor mid-track

    Funnel web is too big for most drag engines. What fuel pump are you running? I would bet you are running out of gas.
  11. ttop88

    Lower intake recommendation??

    I would go with a weiand stealth. And the reason for the swap is the extra 50 hp at the wheels. At least that would be my guess anyway. If this is your primary driver I wouldnt do it. But if not, why not.
  12. ttop88

    Paint Choice Opinions Wanted

    Posted via Mobile Devicetwo tone at the upper body line. That way the jams stay silver
  13. ttop88

    Flowmaster vs Dynomax

    Buy what YOU like!!!! Listening to someone elses car is fine but keep in mind that your engine is an air compressor. The more air you move through it the more the sound changes. Unless you have the exact same Intake,heads,cam,headers, mid pipe and mufflers it will not sound the same. I was...
  14. ttop88

    What intake??

    stealth all the way. I had one with a one inch spacer under the factory hood of my capri. It had the braces cut out tho. And yes, that was with the duel snorkle intake.
  15. ttop88

    need combo suggestions

    You can do 12's with e7 heads carbed. Basic bolt ons, exhaust ,gears. I had gt40p heads and a stealth intake with a 600 holley and would haul ass.
  16. ttop88

    cleaning my a/c compressor

    He's not crazy, I have seen the covers as well. To answer the original question: Use wheel cleaner on it. The stuff kicks ass on bare aluminum. Be careful not to get it on the polished or plated or you will be re-polishing.
  17. ttop88

    maaco bc/cc quality questions

    For a non metallic, Single stage is the ****. Honestly of all the paint I have sprayed, Centari is one of the best spraying paints I have ever touched. It is the base line DuPont for those of you that do not know. And Omni(PPG's baseline) is a close second. And $300 is still cheap for a gallon...
  18. ttop88

    The project I didn't mean to have.

    Um.... NO!!!! No Krylon, Dutch boy, Dupli color or even the ever popular Rustoleum. No brushes or rollers where used. I have an air compressor and a HVLP spray gun. I grew up in a body shop. Picked up a thing or two along the way.
  19. ttop88

    The project I didn't mean to have.

    yeah, that one. I gots a roller for those.:rlaugh:
  20. ttop88

    The project I didn't mean to have.

    Thanks man. New Castle
Top Bottom
Back
Forums
Menu