Search results

  1. red94fiveo

    tps voltage at 1.09 should I change

    Are you sure anything under 1.1V is fine? I thought it was supposed to be under 1.0V?
  2. red94fiveo

    Its Tires and Computer Chip season......

    Well now that my car is finally running well I might as well f it up again. No seriously thought, I need a new set of tires bad, and also a computer chip to correct my idle and just make the car run a little better overall. And, suprise, suprise, I have some questions on both. Here goes: Is...
  3. red94fiveo

    Custom Strut Tower Brace?

    Zach - Stock hood, hood liner removed, and I probably couldn't get more than a couple of pieces of paper in between the intake and the top of the hood, its VERY close. As far as the STB, I do Autocross a lot, and I really notice a difference driving the car without it, so I would very much...
  4. red94fiveo

    Custom Strut Tower Brace?

    As noted in my other thread, I am now running a 1" intake spacer for the purposes of VC clearance. Anyway, needless to say I haven't been able Kenny Brown STB with the 1" spacer, it hits my C&L inlet pipe. My question is this: Would it be feasable to cut out the section that hits and reweld it...
  5. red94fiveo

    THE BEAST LIVES AGAIN!!!!!!!!!

    nmcgrawj - yeah I bought new 6.250" pushrods from Ed C along with the other things, If I had it to do again, I would check the pushrods length with everything else on before I ordered my pushrods. Is there anyway to verify pushrod length without all the stuff on the car? Jake - I want to get...
  6. red94fiveo

    THE BEAST LIVES AGAIN!!!!!!!!!

    I picked my car up from the shp today after 2 1/2 weeks, and all I can say is WOW! As you may or may not remember it never ran right after the H/C/I swap so after about a month of tinkering with it I broke don and took it to the shop. The thing runs great now and just screams above 3500, I'm...
  7. red94fiveo

    Update on my car

    He gave me the same size. I ended up needing 6.400" ones with comp 1.6 pro mags. I just talked to my guy at the shop and he got the studs and rockers assembleds, but with the longer studs my valve covers of course will not clear, so he trying to modify the oil fill neck on a set of fox ones he...
  8. red94fiveo

    Update on my car

    It's been a while since i've posted, so I thought I would let everyone know what is going on with my car. I took it to this local mustang guy at his shop about 2 weeks ago after the H/C/I problems. He tore it down and immediately showed me that my rockers were not sitting flush and I needed...
  9. red94fiveo

    Took 7 weeks, but it finally came!

    Wow, I'm jealous, let us know when that mean combo of yours is running!
  10. red94fiveo

    OT: Just gopt kicked out of the local club

    I know I haven't been posting a lot here lately, my mustang has been in the shop, SUmmit sent the wrong pushrods. But anyway, I just got kicked out of the local club for 'pouring alcohol into a cup for consumption by a minor", bunch of BS, if my friend wants to drink, I really don't care if he's...
  11. red94fiveo

    modular motor swap

    25000 kilometers = 15500 miles
  12. red94fiveo

    Anybody seen seats like this

    pics didn't work for me, but I'm interested in the topic, if you can get the pics up.
  13. red94fiveo

    Exhaust poll!!

    This poll is amazingly even for how many people have voted! Chalk one up for the bassani setup, I love their stuff.
  14. red94fiveo

    modular motor swap

    I agree, $3K for that motor is a steal if its legit! Even if you can't use it in your car, I'd keep it anyway. But if you do use it in your car, like Paul said, the sky's the limit.
  15. red94fiveo

    ATTN: red94fiveo and others using Pro Mags with AFRs

    Thanks for posting that, Jake. This makes me wonder even more about my combo, could this be a source of my problems. I just switched to a 6.400" pushrod and now the rocker geometry is perfect. I guess I'm going to call AFR and see what they have to say. Although it sounds like Ed doesn't hold...
  16. red94fiveo

    header install

    What kind of exhaust are you doing, this will make a big difference. Unequal length shorties are manageable, but equal length or longtubes will be a huge PIA. What everyone else has said is right on, and if you post exactly what you are installing you will probably get a lot more specific advice.
  17. red94fiveo

    what is the funnest thing a cop said to you when you were pulled over?

    Hey the train was 100 feet away, and it wasn't moving! This was like two blocks from my house, I live in a town full of trains, so I'm a pretty good judge on if its safe to go or not. I wouldn't have gone an inch if that sucker was moving. I guess I am the retard for doing it with a cop...
  18. red94fiveo

    I need longer pushrods, yeah!

    When he showed me where the rockers are now hitting on the top of the valves, its a little back of center, so the longer ones make sense.
  19. red94fiveo

    FedEx brought my intake! Ever seen one of these?

    THat looks a hundred times better in the engine bay like that. If you don't mind me asking how much did that whole setup run you and where did you get it (ebay?) Thats going on the turbo'd 331 in the works, isn't it?
  20. red94fiveo

    Are Walbro pumps reliable?

    Yes, they are a direct swap, nothing else to mess with. I also have a 255 lph and it works great. I got mine from www.mmotorsports.com for $99 shipped.
Top Bottom
Back
Forums
Menu