Search results

  1. valley firearms

    My new MSD 6AL has no spark! Please help.

    I just installed a brand new MSD 6AL in my 68. I have the Accel points eliminator kit installed in my dist. I mounted the box on the firewall. I ran the hot wire to the battery and the neg to the neg on the battery(last). I bypassed the pink resister wire and ran a new wire from my ignition to...
  2. valley firearms

    new rims on the 67

    Very nice. Did you replace your quarter panels with 68 sheet metal?
  3. valley firearms

    Engine Startup After Rebuild - advice please

    If everything in the engine is new, make sure you have enough gas in your tank to break it in. I know with a new cam it takes at least 1/2 hour. Check your product info on your components. I broke my cam in for 1/2hr at 2500rpm reducing the rpm after 20 min to about 2000.
  4. valley firearms

    help with a bad miss

    Well, I figured it out. I am embarrased to say it was the plugs. The 750 I was running must have fouled them. They didn't look that bad but I decided to clean them anyway. It runs now with no hesitation and is very responsive. I will have a problem with my idle in gear until I get a stall...
  5. valley firearms

    help with a bad miss

    I ran a wire from the battery to the + on the coil and it still has the popping and missing.
  6. valley firearms

    help with a bad miss

    Here is a link to their directions.ACCEL eliminator instruction sheet As you will read, they do state that if you don't have a resister wire than you must use a aftermarket resister. BUT, if you use their coil(I purchased the 8140C) neither is required. Maybe the coil and the resister wire...
  7. valley firearms

    help with a bad miss

    Thanks for the response. Is this the same type of problem with the pertronix? How do I bypass the problem in detail please. Thanks! Mike.
  8. valley firearms

    help with a bad miss

    New to this site. A lot of you guys seem very knowledgable as I read through your posts. I purchased a 68 coup several months ago and thought I'd re-live my teenage years again. I have owned half a dozen stangs 19+ years ago and my 65 fastback was my favorite. Here is what I started out with...
  9. valley firearms

    '67 Deluxe/Autometer Phantom clusters -- should I produce these?

    Hello, How much for a 68 standard panel? Please e-mail me @ [email protected] Thanks! Mike.
View older results
Top Bottom
Back
Forums
Menu