Search results

  1. misterb

    Bassani Midlength headers??

    I installed the Bassani's myself.. and I'm no Mr. Goodwrench either! They come as separate tubes which then have the collectors slip fit. If you go with the Bassani X-Pipe with cats, they also have adapters to remove the cats. The key is to jack the engine the right amount as you...
  2. misterb

    Precision (Tire & Wheel Performance) 17S

    BIG thanks to Precision (Tire & Wheel Performance) on 17S, Ridgewood! I had to bring the car back for an alignment because I added the MM Camber/Caster plates. The previous alignment was close but out of specs. My car was a bitch to get right.. and then FINALLY they got it right on the...
  3. misterb

    Racing Fuel

    I use Torco concentrate (UNLEADED) and 1 qt to a 92 Octane fill up gives you 102-104 Octane.. and it will not harm 02's.
  4. misterb

    Oil on top of motor

    After going WOT in 1st gear, I noticed that I blew some motor oil ON TOP of the motor, and it settled on the passenger side valve cover where the bolts go.. that relief in the valve cover for the bolts. Could this be a faulty PVC valve? Any ideas?
  5. misterb

    best psi for drag radials?

    17 pounds, 26 for the ride home..
  6. misterb

    "Concealed" Starter Bolt

    I'm installing the Bassani Headers and have one comment- I'd like to take an aluminum baseball bat to the sadistic Ford Engineer who placed this "Concealed" Starter Bolt where it's located.. :chair: :chair: :bang: :fuss: :bang:
  7. misterb

    NJ Performance Shops

    Another vote for Alfredo.. :hail2:
  8. misterb

    performance of cat back system?

    That's what's going in my 02 GT. Good to hear that it doesn't drone.
  9. misterb

    Fix your Slow dropping/hanging RPMs

    Thanks- I already ordered the plate, one of the first things I noticed when I first drove my car.. as opposed to the 2000 Firebird I had.
  10. misterb

    Fix your Slow dropping/hanging RPMs

    Can you post up a picture exactly where I install this plate (on a 02 GT)
  11. misterb

    Track tomorrow- some questions

    Going to the track tommorrow with the 02 GT.. What is the stock rev limiter set at.. and what should I set it to with the Predator? What RPM should I shift at (didn't get a chance to install shiftlight) and I will have the stock tires, so what should I launch at? I also plan on adding...
  12. misterb

    DiabloSport Predator Hand Held Programer

    http://www.modularfords.com/forums/showthread.php?t=26705
  13. misterb

    Amsoil 0w30 with Vortech SC ?????

    Amsoil 2000 0w30 is a Premium Oil.. don't be afraid to use it! GM makes stuff called "Top End Cleaner" which really works.. how many miles do you have?
  14. misterb

    Want to build your own turbo kit? CHECK OUT MY SITE!

    Very Excellent website.. car should move!!!
  15. misterb

    Which grade of Amsoil should I run?

    The good stuff.. http://www.amsoil.com/storefront/tso.aspx
  16. misterb

    copper or iridium plugs for KB?

    The stock heat range (for Denso) is IT-16, one step colder is IT-20 The stock heat range (for NGK) is TR55-IX, one step colder is TR6-IX Check out www.clubplug.net
  17. misterb

    Predator Article

    http://www.fordmuscle.com/archives/2005/02/DevilsAdvocate/index.php It is funny to think that twenty years ago, when Ford Mustangs were introduced with computer controlled engine systems, many people felt it signified the end of hot rodding. "EFI and EEC controlled engines will be too...
  18. misterb

    Mr. Clean and Pinnacle

    I used the new Mr. Clean "Autodry Carwash" and then a coat of Premium "Pinnacle" Souverain wax.. the results are fantastic!!! I got the Mr. Clean system at Amazon, and Pinnacle also on line. Easy and works excellent!!! Great on Red, Black, and Yellow cars. http://www.pinnaclewax.com/...
  19. misterb

    Head Porting Pictures

    The shops name is: http://www.etheads.com Check out these pics: http://www.etheads.com/examples/examples.htm# I e-mailed to find out if they work on 4.6 Mod Motor heads.
  20. misterb

    Motive 3.90

    I went with Pro-5.0 gears in 3.90, along with the Auburn Pro, 31 Spline Superior Axles, and a TA Cover. I'm very happy with them- quieter than the stock 3.27's. GP here: http://www.teamcjmf.org/phpbb2/phpBB2/viewtopic.php?t=1081
Top Bottom
Back
Forums
Menu