Search results

  1. DJ Fury

    Drivetrain Transmission Dying Need Help

    Has anyone dealt with Transdepot? I heard they do alot of volume and this is the tranny I'm thinking about getting. http://www.transdepot.net/4R70W-Ford-Mustang-Stage-2-Transmission-_p_188.html
  2. DJ Fury

    Drivetrain Transmission Dying Need Help

    They are the same? I did think it was odd that they all specified manual trans. Whats needed to stick it in? I'm assuming I'll have to change the yoke for the one that's on my car now
  3. DJ Fury

    Drivetrain Transmission Dying Need Help

    Have a 2000 GT Automatic with 141k on the clock. When the tranny shifts at anything above 3000 rpm it throws codes for 1-2 shift and 2-3 shift and the O/D light starts flashing. I've already been planning on going with a stage 2 auto from Transdepot unless someone can give me advice otherwise...
  4. DJ Fury

    Does Anyone May A Replacement Auto Shifter Slider?

    Mine did that same thing, scoured everywhere with no luck. I bit the bullet and bought a new bezel from Ford. Its really not hard to change out. Although looking back on it now I probably could/should have just left it alone as I went to a ball shifter and stuck a leather boot on it and...
  5. DJ Fury

    Engine Motor Rebuild Time (advice Please)

    Hello all, I'm looking for some build advice on what to do with my rebuild. 2000 GT Vert Stock motor with a tad over 140k on her, never had a mechanical problem aside from an ejected spark plug. Had the pan dropped the other day and internally she still looks clean and beautiful and I suspect I...
  6. DJ Fury

    Advice On American Muscle For Wheels...

    I've had a set of 17x10.5 rear and 17x9 front FR500's with Nitto NT555 315's in the back and 275s up front for almost 2 years now from AM. Excellent quality, if you buy tires with them they come balanced and ready to bolt on straight out of the box. I think they carry a one year warranty on the...
  7. DJ Fury

    3.73 Installation price!

    Depending on the quality of the shop you can expect to pay anywhere from 350-700 for a rear end rebuild. I recently had mine torn apart and rebuilt with an 8.8 rebuild kit, Trac-lok rebuild kit, and new gears and i payed $497 for labor. I would recommend buying all the needed internals for a...
  8. DJ Fury

    Tach Sticking

    Do you have aftermarket gauges?
  9. DJ Fury

    headlight panel removal

    The headlight assembly is extremely easy to remove. Pop the hood and look down at the back of the assembly and you'll see 2 slide pins that secure it in place. Pull the pins up and out and you can then pull out on the headlight housing. When you get it far enough out you'll have access to the...
  10. DJ Fury

    halo headlight replacement

    Good deal man, glad you got it easy. Ok so the high beam is harder to get in because there's no direct access. What you have to do is remove the low beam bulb completely so that you can get a couple of fingers in there, and if you look on the bottom of the assembly you'll see a round rubber...
  11. DJ Fury

    halo headlight replacement

    Ok good then. The lows on these are comparatively easy to change versus the hi's. Those require a bit of finesse..
  12. DJ Fury

    halo headlight replacement

    By the way which bulb is out?
  13. DJ Fury

    halo headlight replacement

    Got it. Ok then removal is easy. First there are 2 slide pins located underhood that secure the entire assembly in place. Remove both and you can then pull straight out on the housing. Pull slowly and behind you'll find your main harness plug. Disconnect that and next you'll have to see...
  14. DJ Fury

    halo headlight replacement

    Ok. Need a little more information here. First, those housings take an H1 bulb, not a 9007. Now, you did not specify if you had HID's, which changes the bulb you'd be looking for. If you have HID's there will be ballasts mounted somewhere and usually a harness running to the battery for Hi's...
  15. DJ Fury

    Guys with Mac Prochambers

    To give you a better answer, what catback are you running? Its been my experience that Prochambers do not pair well with straight through mufflers. If you have chambered mufflers such as Flow 40's, magnaflows I'd say go for the prochamber and don't look back, but if you're running say a LM1/2...
  16. DJ Fury

    halo headlight replacement

    Bottom line - There are multiple models of Halo Projector headlights, and this is the reason you're being met with hostility. Its like asking if anyone has "the aftermarket exhaust" and if they know how to fix it. There's numerous manufacturers and in lieu of an actual model number, which the...
  17. DJ Fury

    White Faced Gauges

    If its all 3 its likely the extra harness that those reverse glow overlays require. Had a couple extras laying around from the same kit. Took a quick photo so you can see what everything is and how its connected. Its 3 separate pieces with 3 separate electrical connections made centrally on...
  18. DJ Fury

    Stupid Broken Part

    Yeah really paper thin.. I just don't like the look of being able to see down into the shifter...
  19. DJ Fury

    4R70W parts

    I'm kinda interested in the shifter, how was the install process and do you have any pics from when it was installed?
  20. DJ Fury

    Stupid Broken Part

    Went to get in to drive to school tonight and noticed the small plastic cover that sits around the base of the auto shifter. Its the piece that moves when you shift and keeps the open area below the shifter covered up. That piece is broken and I'm wondering if a quick dab of adhesive would be...
Top Bottom
Back
Forums
Menu