Search results

  1. B

    Coolant leak found..pics

    The gasket? Looks composite to me I guess...I assume that this is the crossover. When I pushed on it with my finger, it felt wet, and had a touch of coolant on my finger...so I'll change that out first.. Is there an Aluminum upgrade? Or..part number? Anything else I should be checking?
  2. B

    Coolant leak found..pics

    Hey guys, So I found the coolant leak...finally.. been doing alot of searching, about intake leaks, head gaskets..etc. Now, has anyone had this lil puddle before? I wanted to post it up before taking things apart, that I don't need to take apart. Don't think it's the water pump...
  3. B

    Filler neck/Gas tank leak: Chime in this is important

    This is what clubs do! thumbs up for Stangnet!
  4. B

    Trying to get the damn old shifter out..

    lol yup...I concur with that scenario... ***remembers bump on head***
  5. B

    You want wide? IVE GOT YOUR WIDE!

    Yes, seeing those braided lines can be quite the deterrent lol, the mega tires will confirm to simply, back off Jack.
  6. B

    Filler neck/Gas tank leak: Chime in this is important

    I did mine , same thing, looks like the rubber failed and rusted out my entire filler tube. I actually didn't know util I got pulled over and the cop warned me about it. I had just just finished filling up. Anyhow, I replaced the whole kit and didn't drop the tank. I did however do it on t...
  7. B

    How do you guys Clean the engine bay?

    When I say low pressure, I mean garden hose no pistol nothing, maybe the mist setting or soaker, but that's for the back
  8. B

    How do you guys Clean the engine bay?

    I literally hose down the engine bay with armour all/Amsoil and blow it with the air gun.
  9. B

    How do you guys Clean the engine bay?

    I start like this: If its nasty, soap low pressure hose. Then into the garage for armour all and air gun. Amsoil MP metal protector to keep it crazy shiny , plastic and metal . Works awesome
  10. B

    ANyone run an elec water pump and bypass the pully?

    I'm interested in this also. The most I've actually SEEN is 11HP but that could be one dyno run to thenext
  11. B

    Steeda Front Strut Bar

    We all have our moments... In Mexico with those blo--- Nevermind.
  12. B

    Steeda Front Strut Bar

    I prefer not too weld em incase you need to take em off for future mods/service. Keep that in mind maybe
  13. B

    Need Helps With High flow cats

    Wow, never heard of that. Good luck with that one, is there even room?
  14. B

    Short Throw Shifter Help!

    I Think its opinion, I've had and installed all of em and for me, ill always recommend and use the steeda tri ax. Maybe see in your area some buddies and try em out
  15. B

    Steeda 03-04 cobra bumber????

    I put one on my 2000 with no issues if that helps at all
  16. B

    suggested spark plug gap????

    I've run them both, and the ngk was fine, my tuner wants me to go back to Motorcraft, so I am. Didn't see a difference between the 2
  17. B

    gear oil

    I ran 7590 in mine and found drag. Spoke with ford racing for awhile, and also Amsoil tech. Put in the Amsoil 75w140 its a charm now. :)
  18. B

    1996 through 2004 Technical Service Bulletins

    This 404'd Any update?
  19. B

    How much psi in mickey thompson drag radials at the track?

    Depending on the temperature, I run between 12 and 17....I kinda play around until I find whats right for that night (or day) at the track...usually start at 17 or 16 and go down from there. I also go down by 2lbs until my 60fts get worse then go up until it maxes.
  20. B

    Anybody running Mickey Thompsons on a 17" rim?

    right...didn't read properly...my bad....
Top Bottom
Back
Forums
Menu