Search results

  1. Luis911

    Mystery serpentine belt

    It is the same turn in position A or B
  2. Luis911

    Mystery serpentine belt

    A few days changed the cover timing chain and OK :D. Now the serpentine belt only comes into the position A and should go in the position B :shrug: (before worked reversed) and I have already done this several times perhaps a component movement? :eek:
  3. Luis911

    I can not remove the cover of the timing chain

    Good news :D and bad news :mad: We removed the cover, had a bolt slaughtered, loosen the oil pan. Also the area of water pipes with metal woodworm, apparently had welding Pictures attachments http://img235.imagevenue.com/img.php?image=57037_left_122_90lo.JPG...
  4. Luis911

    I can not remove the cover of the timing chain

    This is the chart http://img132.imagevenue.com/img.php?image=65251_Ford_Timing_Cover_Chart__122_858lo.jpg
  5. Luis911

    I can not remove the cover of the timing chain

    I do'nt see the 4 bolts, I have already removed 6 of oil pan. Other question, in a chart of timing chain cover, relates to RTCF-351RF with Reverse rotation water pump and serpentine belt, is a 351 engine?
  6. Luis911

    I can not remove the cover of the timing chain

    Resolved - I can not remove the cover of the timing chain I have a leak between the cover of Timing chain and the engine block, I want to remove the cover and change the seals, and Removable fan, pulley, water pump, damper, screws and seal the shaft I did backwards, but I can not remove the...
  7. Luis911

    Looking for moulding left door GT 1990 to send Mexico

    The moulding of the left door come loose and was lost :(. I'm looking for who can sell and send to Mexico Mustang GT 1990. Thanks
  8. Luis911

    Because the most advisable not to work for me?

    Mustang 1981, conver. ext. 1990 and int. 1987 EFI 5.0 H.O. 5vel. + rev. MAP, ported head, rear 245/45 17", front 235/45 17"
  9. Luis911

    Because the most advisable not to work for me?

    Disconnect the spout to make the test of timing and the engine was hot. Before already adjusted the time and left him marked up to 10 degrees, 1 month ago to buy a lamp craftsman and I checked the time with different combinations. The car I bought 2 years ago and the previous owner told me...
  10. Luis911

    Because the most advisable not to work for me?

    Started to try to 10 degrees, the indictment was felt with little power to raise grades was more powerful, 2 weeks ago I went to the extreme and put him as 26 degrees. He moved Timebase IAC and use the value of 0,985 V, the scanner I was unable to remove the error 12 because RPM are as 950...
  11. Luis911

    Because the most advisable not to work for me?

    I tested with 87 and 91 octane, 91 octane improvement but a combination of the spark plugs asfc42c with 91 octane is poor compared to 87 or 91 octane and spark plugs bly15
  12. Luis911

    Because the most advisable not to work for me?

    My mustang has only porting heads and compression of 130 lbs. I read a lot of information and come to the conclusion that for a stock engine the best values are: Timing = 13 to 16 degrees Spark plug = ASF42C or similar copper Gap = .045 Because my best performance is with the...
  13. Luis911

    Compression test on 81 conv. 87

    This is order of cilynder: 4 5 3 6 2 7 1 8 FRONT Cylinder Tests (kPax100) 9.0 kPax100=130 lbs per sq.in 1.- 9.0 9.0 9.0 2.- 9.0 9.0 9.0 3.- 9.2 9.2 9.2 4.- 9.1 9.0 9.0 5.- 8.7 8.2 8.5 :notnice: :mad: 6.- 9.0 9.1 9.1 7.- 8.8 9.0 9.0 8.- 9.0 9.0 9.0...
  14. Luis911

    Battery mysterious...

    it seems that it wants to start, like when it is not used the car or there is cold climate
  15. Luis911

    Battery mysterious...

    My battery have 5 months old, when I use the mustang and park it, all is normal, but If I turn on the mustang between 5 and 40 minutes later, battery is dead, no march, then I used to jumper and mustang turn on OK, but after 40 minutes or more hours battery always ok and mustang function very...
  16. Luis911

    E7TE porting, best Timing and gap spark plug?

    Hi, I tried a lot of combinations, I have ET7E porting, my best performance is: Timing=20° Gap spark plug=0.33 Worse: Timing=18° Gap spark plug=0.45 Thanks.
  17. Luis911

    Water leak

    Update... When engine is off, I was filled radiator and water leak as show picture (a lot time), then, I turn on engine and after 10 minutes engine warm up normally, and leak was to disappear, WHY?:shrug: , what hapeened? :nice:
  18. Luis911

    Water leak

    Thank you very much. Why not to apper my record? (mustang 1981 conv. 1987, EFI, MAP, 5 vel.+rev.) pump water have less 1 year. Thanks.
  19. Luis911

    Water leak

    On engine I can't see anything, only a small accumulation of water, maybe water to drain or leak beside base pump water or block?? :shrug: I put other picture. When the mustang is cold and off, I put water in radiator and begin to drip...:nonono: Thanks
  20. Luis911

    Water leak

    I have a water leak, replace gasket of base pump water? Thanks
Top Bottom
Back
Forums
Menu