Search results

  1. 90silverstang

    PCV valve problems...

    how can you see where the pvc valve screen and grommet are???? I can get the pcv valve out but I'd be dam'd if I can see-remove the grommet and screen.
  2. 90silverstang

    How do I clean my EGR valve?

    I just had the same problem with my car. Check engine light would go on when I acellerate and go off when I let up on the gas or just cruise, as soon as I stepped on the gas it would light. I had 2 problems, I had a dead spot in the TPS and the EGR sensor was flakey. I also pulled the codes...
  3. 90silverstang

    PCV valve problems...

    That looks like the one, you have to pull off the two hose barbs, pull it straight out to expose the single inline hose barb. That is where the hose connects.
  4. 90silverstang

    new tps question

    I want to make sure I got this right.--- To adjust the TPS you 1st disconnect the IAC connector with engine off, then start engine, and adjust the throttle plate screw for about 700rpm. Next is to shut down engine plug in the IAC connector. Then, with a dc voltmeter adjust the TPS for .98v with...
  5. 90silverstang

    new tps question

    I just replaced my TPS, I set it for .98v but I didn't adjust the throttle plate first. How can i verify if I'm idling at 700rpm with the IAC disconnected. The tach in the car I wouldn't trust. Any tricks??
  6. 90silverstang

    Check Engine Light Problem

    Thanks for info., Itwas a bad TPS. It had a dead spot in it, also replaced the egr sensor it was intermittent also. Thanks again.
  7. 90silverstang

    Lets see some pics of 5.0's with 10Hole Rims

    I got a set a 4 wheels and tires for sale if anyone is interested---- 10 hole 4 lug with caps and tires ---$100.00
  8. 90silverstang

    Check Engine Light Problem

    I purchased a code reader from Walmart for $25.00. The brand name is Innova Model 3143. Hope this helps.
  9. 90silverstang

    Check Engine Light Problem

    Thanks, I will check TPS tomorrow
  10. 90silverstang

    Check Engine Light Problem

    Pulled the codes Well I pulled the codes here they are: 31 and 63. What do you guys think???
  11. 90silverstang

    Check Engine Light Problem

    Thanks guys I'll check the codes and the egr sensor.
  12. 90silverstang

    Check Engine Light Problem

    My check engine light comes on only when I accelerate. It goes off when I let up on the gas or just cruising. As soon as I step on the gas it goes on. Anyone have this same problem??
  13. 90silverstang

    Help Diagnose Engine Problem

    Might of spun a bearing. Try a compression test also. Are blowing any blue smoke?
  14. 90silverstang

    Which roller rockers on AFR 165 stud mount?

    Thanks ashford, I was doing some research and I believe you and CETV are right. They are crane rockers that were contracted out by Ford Racing. I'm glad I started this thread to find out if the rockers would not work on the AFR heads, saved me some money, thanks for the help!!
  15. 90silverstang

    Temperature rises quickly after accelarating...

    Try a thermostat first, Your radiator may be clogged in some of the tubes. I T'stat doesn't solve problem have the radiator checked and boiled out.
  16. 90silverstang

    Which roller rockers on AFR 165 stud mount?

    Roller rockers Here is a picture of the rocker.
  17. 90silverstang

    Which roller rockers on AFR 165 stud mount?

    Will Crane Roller rockers, Part # F3ZE-6529-AB work on AFR 165cc stud mount heads??? Thanks.
  18. 90silverstang

    which cam E303 or??

    Looking at my signature which cam would be good for my setup? I also have edelbrock peformer intake, 24lb injectors, GT40x heads . I don't want the cam to be to wild so I was looking at the E303 cam. It is a 5 spd. i want low end torque and its a street car.
  19. 90silverstang

    Edelbrock peformer efi intake clear a stock 90gt hood?

    Anyone have a peformer intake????
  20. 90silverstang

    Edelbrock peformer efi intake clear a stock 90gt hood?

    Will a edelbrock performer intake clear a stock 90gt hood
Top Bottom
Back
Forums
Menu