Search results

  1. 94GT40

    Cam suggestions?

    I actually considered an E-303 earlier on, but the Trick flow is cheaper and from what I understand the E-303 lobe profile is a bit dated. The Trick Flow is a more modern design [Read that as higher tech design.]
  2. 94GT40

    Cam suggestions?

    I thought I might get more feedback over here... 1994 Mustang GT 5 speed Sitting in the garage ready to bolt on: 65mm throttle body 94 Cobra intake GT-40P heads [5 angle valve job w/ 1.94 intake/1.54 exhaust] Mac Ceramic coated GT-40P headers 1 5/8" diameter 255lph in tank fuel pump...
  3. 94GT40

    Contemplating an exhaust system...

    I had a convertible with a Flowmaster exhaust system on it and the stock "H" pipe and it was pretty annoying at highway speeds [serious drone]. Now that I've got my 94 coupe 5 speed I went with an OR "X" pipe and kept the stock catback system and it sounds great. Nice burbling idle, nice growl...
  4. 94GT40

    Cam advice...

    Can you give me a pointer on the net?
  5. 94GT40

    Cam advice...

    1994 Mustang GT 5 speed Sitting in the garage ready to bolt on: 65mm throttle body 94 Cobra intake GT-40P heads [5 angle valve job w/ 1.94 intake/1.54 exhaust] Mac Ceramic coated GT-40P headers 1 5/8" diameter 255lph in tank fuel pump Already installed: Off-road "X" pipe K&N air...
  6. 94GT40

    Sunroof?

    Yeah... Thanks for the response, but I understand all of the above. I'm wondering: 1. Who makes one that fits our cars? 2. Are they any good? 3. Has anyone here actually installed one?
  7. 94GT40

    ppl w o/r pipes come here

    I don't. I live in Alabama. :banana:
  8. 94GT40

    Sunroof?

    I've actually given it some thought, but I wanted to research the sunroofs too. Anyone have any experience/suggestions?????
  9. 94GT40

    Sunroof?

    It's that time of year and I miss my '95 convertible and was thinking of cutting a hole in the roof of my '94 coupe. Has anyone installed a sunroof in their coupe? Any links and or recommendations, brands, etc...?
  10. 94GT40

    Thumper Heads

    http://www.tristatecylinderhead.com But they don't have them listed on the site you have to call Jim Daly, he's the owner, and talk to him. He sells the heads completely assembled, valves, springs, etc...
  11. 94GT40

    Thumper Heads

    I seriously considered the Thumper heads too, but settled on the GT-40p heads from Tri-State cylinder head. They are brand new castings with a 5 angle valve job and 1.94/1.54 valves in them. I think they are like $450 +shipping. Less money and more hp. Of course you will probably want to get...
  12. 94GT40

    what the heck is this?

    I had the same issue. Took the panel off. Bent the "L" bracket and fixed the problem. I don't remember seeing a piece that looks like that. There's something rattling in my door. [I found an old rusty chisel in there last time.] When I open the panel up next time, I'll look for the part...
  13. 94GT40

    Cobra IRS?

    Since it is a mainly street car, and it will have less than 350 fwhp, I was hoping that it would give it better road manners. Better cornering under spirited daily driving, bumpy real world street conditions, etc... And to be honest I do think it would up the cool factor of my car to have an...
  14. 94GT40

    Cobra IRS?

    Yeah... That is discouraging. Since my new combo might be putting out 320 FWHP I figured that the Cobra rear end would hold up to it.
  15. 94GT40

    Cobra IRS?

    Well... It's not like I'm gonna buy one this weekend or anything. Hell... I ain't even got my heads on yet. They're sitting in the garage. :shrug:
  16. 94GT40

    help w/cleaning windshield plz

    Windex and 0000 steel wool. This is that same stuff you use to get off the glue left by removing window tinting. Another alternative is "Barkeepers Friend" It is similar to Comet, but is finer and won't scratch anything.
  17. 94GT40

    GT40p Header help

    I don't believe these are the one's he wants. I've got GT-40p's in my garage waiting to go on, and I called Ford Racing Tech support. They said that FRPP does not make any headers for 94-95 cars and GT-40P heads. The only ones I've been able to find are the ones from MAC and the ones from CCM.
  18. 94GT40

    Cobra IRS?

    I'm kinda surprized that no one here has piped in yet. I figured several of you guys would have made this swap. From everything I've read it bolts right up to all of the stock mounting points. There may be like two holes you have to drill or something.
  19. 94GT40

    Cobra IRS?

    Has anyone here ever installed one of these in your SN-95? I've seen them for sale for anywhere from $600 to over $1200. I have heard that they will basically bolt up in place of our stock rear ends. Is this true? How much of a job is it?
  20. 94GT40

    Emergency brake boot?

    ebrake and shift boot, both leatehr for $60, free shipping from: redlinegoods.com I knew I saw it on someone's interior!!!!! Thank you :hail2: :banana: I'm going to that web site now... :spot:
Top Bottom
Back
Forums
Menu