Search results

  1. M

    long tube question

    any one know who makes some long tube headers for a 4.6 with an automatic trans? and do you really have to lower the crossmember to install them? the car is a 2000 mustang gt:D
  2. M

    fox lake p-51

    i'm looking to add one to a n/a 4.6 thats why i want to know the operating range. is it 1500-6500 or is it 2000-7000 what is the advertised range.
  3. M

    fox lake p-51

    does any one out there know what is the operating rpm range of the fox lake p-51 intake for a 4.6?
  4. M

    Mach 1 into GT

    is the 3650 that you mentioned the automatic in a 2v 2k mustang gt? i have been thinking about doing the same swap, i have a 2k gt with the at tranny and i would like to keep it auto with a 4v motor:nice:
  5. M

    throttle body adapter

    oh i see now, just redrill the upper 2 holes and then get the extender bracket from 40bob.:nice:
  6. M

    throttle body adapter

    hey guys where can i get the throtle body adapter thats used to use the 65mm body from the sn95? thanks:nice:
  7. M

    Timing issue

    well with out the proper timing advance the car will NOT pull out of the corners, not hit higher rpm quickly and it wont acheive top rpm/speed quickly. If i'm not mistaken you also lose torque.
  8. M

    Wheels-Tires Wheel/tire Combos Known To Fit

    not really, the width of the rear fenders are wider that the front so the difference in the rim width would NOT look funny.
  9. M

    Wheels-Tires Wheel/tire Combos Known To Fit

    i know my son bought some 17x8 for the front of his fox body from summit.
  10. M

    2.3 power after rebuild not up to expectations

    Hey 71fordramair how did you convert it to mass air? i run a speed density setup in my 87 stang that i run in the scca and i also did a complete rebuild/modify and it seems that i feel i should have gotten more. did you degree the cam shaft and the crank then line up the pullies. i milled my...
  11. M

    Timing issue

    just a thought guys, could it be the module that sits on the side of the distributor? i think that it does control the advancing of your ignition:rolleyes:
  12. M

    Wheels-Tires Wheel/tire Combos Known To Fit

    why not run the 17x9 out back and some 17x8 up front. please can you post some pics.thanks
  13. M

    Timing issue

    i just noticed this when i was trying to time my car the other day. when i have the timing light on it i notice that when i bring up the RPM's the advance actually drops or goes down before it actually advances or goes up. any body have any idea what would be causing this?
  14. M

    Wheels-Tires Wheel/tire Combos Known To Fit

    Hey Project77 you have got to post some pics without the spacers and then the spacers, front and back, please!
  15. M

    Ghia conversion to hardtop?

    hey DANO78 what are you looking to get for the windows and the trim? i would really like to do that to my ghia.
  16. M

    lowering that car.....

    one more :D
  17. M

    lowering that car.....

    well i hope the pics come out good.
  18. M

    lowering that car.....

    when i cut the springs for my car i cut off exactly 3 coils. the stock 2000 GT springs are rated at 450 lbs, with the 3 coils i cut off it brings them to 600lbs. i feel it's just right a sporty feeling ride that handles alot better than the old stock mustangII springs. as far as the lowering...
  19. M

    lowering that car.....

    i do have those spacers on my mustangII and also have the stumpy's traction bars and there is NO clearance issues. up front i'm using stock GT springs from my 2000 GT (free after spring swap) cut to exactly 10 1/4". to help with the idea of better dampening i also put on the mini stock style...
  20. M

    Bolt on Cowl Induction scoop

    Hey VEGAS ssaawweeeetttt!:nice: :nice: :nice: if you could how about a side shoot of her.
Top Bottom
Back
Forums
Menu