throttle body adapter

[manny]

hey guys where can i get the throtle body adapter thats used to use the 65mm body from the sn95? thanks

 

[Red_LX]

You don't need an adapter...just redrill a couple of the holes on the throttle body.

You will need an adapter for the throttle cable- 40Bob.com - 2.3T headers, ported and gutted intakes, and accessories. has them.

 

[manny]

oh i see now, just redrill the upper 2 holes and then get the extender bracket from 40bob.

 

[mg man]

How I did mine no buying anything. Picture on these two pages.
mgman75 - Photobucket - Video and Image Hosting
mgman75 - Photobucket - Video and Image Hosting

 

[stykthyn]

was there a noticable difference when you upgraded? I have a stock 5.0tb and a 65mm cobra TB laying around but I figured it wouldnt be worth the effort.

 

[mg man]

I did notice better throttle response. Not sure if it gave more power. But my turbo is a little bit of modified. 3" exhaust, ported exhaust manifold, intercooler, c-4,

 

[Red_LX]

It makes the throttle kinda touchy, you have to use a light foot...but man, WOT feels good when you slam down the go pedal.

 

[stykthyn]

would this be a good mod for a N/A motor?