Search results

  1. C

    OT- Going to Afghanistan Monday

    you just got a prayer from a Mississippi redneck
  2. C

    GT40 heads?

    No dude, those are gt-40 heads.
  3. C

    Broken differential shim

    ss93cobra- thanks for the info. I called the local Ford dealership and gave them the part #, they had two in stock and one was the exact one that I needed. Thanks for the replys guys
  4. C

    Broken differential shim

    I broke the shim while putting my trac-loc back in tonight. Any suggestions on where to get just one shim? I need one .261 but would take one bigger. I can surface grind it to size. How do you guys get the trac-loc in as tight as it is? Any tricks?
  5. C

    Rut RO!!!

    pics man!
  6. C

    Is it hard to install Gears

    I'm in the middle of it right now. It is not VERY easy as some here have said. I have been doing industrial maintenance and working on gas turbines for 14 years so I am by no way new at working on machines. If done properly, it is a tedious process. If you are bound and determined to do it...
  7. C

    How to get in/lbs reading on gears?

    ttt
  8. C

    How to get in/lbs reading on gears?

    ttt
  9. C

    How to get in/lbs reading on gears?

    Thanks guys, any more?
  10. C

    How to get in/lbs reading on gears?

    Yeah, Thats the way I do wheel bearing after a fresh packing but I really want to do this once and once only. I have hit up everone I know and no luck on the wrench.
  11. C

    How to get in/lbs reading on gears?

    Thanks for the advice, and I have a full grasp on how to do it and what to do, I just don't have the wrench to do it with. I was wondering how everyone else got their reading. I am a maintenance supervisor so I have done a few gear setups on machines but I have never had the need for an...
  12. C

    How to get in/lbs reading on gears?

    I'm having trouble finding a way to get reading on my pinion install. I need to read 8-14 in/lbs but the lowest torque wrench that I have found starts at 50. I don't want to go buy one just to use once and I have tried all the parts houses that have the tool borrow program. How did you guys...
  13. C

    Installed RPM Extender, questions????

    Damn fellas, that was almost five months ago that I posted this question, I guess better late than never! Heres the skinny.... I took the extender for the fox body out and sold it and got one 94-95 specific and all was good. I am very satisfied with it.I got $280 for the fox extender on...
  14. C

    what springs are you guys running? Specific VS. Progressive?

    I have FMS "B" progressive springs and I love em. Perfect drop and good ride plus they carve the curves with no problem. For $140 you can't beat them
  15. C

    Which Dynomax catback does everyone run?

    I have had both. I have ultra flos now and love them. Its real simple, super turbos are quieter than ultra flos but the ultra flos are not really that loud.
  16. C

    Anyone using 1.7 rr on intake and 1.6 on exhaust with gt-40 heads?

    In 5.0, thier best results came from 1.7 exhaust and 1.6 intake.
  17. C

    anybody take a part there MAF?

    While I had mine off, I cut the center post out and ported and polished the inside. Got good sop from it. If your bored, give it a try but be aware, it is going to take about 8 hours.
  18. C

    Before I get ripped off...

    The alt will not put out 14v at any speed. It does not jump up to that until about 900rpm. He may have UD pullies .
  19. C

    Under drive pullys or no?

    I have them with almost 1000 watts of stereo and I live in Mississippi( read hot and humid as h%ll) and I have had ZERO problems. i say get em!
  20. C

    Thinking Volvo 5.0 .......

    I had a 91 LX 5.0 taht I sold to a dude and he flipped it. My buddy and his brither bought the car and put the whole drive train in a volvo station wagon. I asked him about it and he just smiled and ssaid"a blow torch, a welder, some iron and a little time was all it took". The car rocked when...
Top Bottom
Back
Forums
Menu