Search results

  1. kpack5982

    Exhaust manifold gasket

    felpro gaskets with copper rtv, had issues with my individual flange mac shorties and this worked
  2. kpack5982

    Pilot bearing replacement question.

    agreed, i used the Slide Hammer from Autozone, put down 80 bucks deposit and got it right back in 1/2 an hour. Can't beat the ease of it, either
  3. kpack5982

    Dyno Costs

    I'm trying to find a place in the Des Moines Iowa area to dyno tune once I add a turbo or supercharger to my car, by the end of the summer. The only place I can find charges $150/hour to tune the car on a chassis dyno. They would charge 100/1st hour and 80/hour after to have it just overlooked...
  4. kpack5982

    Mac or BBK header Opinion?

    The BBk should fit with the rest of the mac exhaust on. I would recommend the BBK over the MAC anyways, I've had both and i don't like the mac, it keeps warping because it isn't a single flange to the heads, causing exhaust leaks, even with copper rtv.
  5. kpack5982

    Deciding my bolt on combo.....

    how about thread sealer for some of the head bolts I believe when I got mine explorer intake gaskets, there were some kits that came with both the upper and lower gaskets, and some that have them individually. I wouldn't go to the auto parts stores, those gaskets are about twice as much as...
  6. kpack5982

    Mac Prochamber question?

    i've love mine! and my car is far from quiet, but then again the dumps help out a lot. when I put the cam in, even better!
  7. kpack5982

    WHOA!! Stop right there!!!

    I guess I often mistake C4 vettes and Mustangs:rolleyes: . I am positve that it was a mustang tho. I'll drop by my rents house and take a picture if I can find it
  8. kpack5982

    WHOA!! Stop right there!!!

    my little sister used to have a barbie mustang just like that!
  9. kpack5982

    Still don't know how to jumper something

    ignore the push on connector for now, to check if the injector is working you can stick like a pushpin into the wires in the injector, one to the ground and one to the power wire, then put a test light to it when you try to start it to see if the injector is pulsing like it is supposed to. the...
  10. kpack5982

    Still don't know how to jumper something

    basically jumper is either connecting a jumper wire ( a wire with alligator clips on either side) to each side of a terminal, or for the starter, when you look at it, the two bolts sticking out on the starter relay (starter solenoid). One of them connects to the battery and the other the...
  11. kpack5982

    Fuel problem diagnosis help

    yeah, i've gone through adding and taking out pressure all the way both ways to no avail. i know the seals on the injectors are good too, as I replaced those recently as well. well i bought a 255lph pump not too long ago to put in, just waiting for good weather, maybe i'll stick that in and...
  12. kpack5982

    Fuel problem diagnosis help

    anybody?
  13. kpack5982

    Fuel problem diagnosis help

    Alright i went to start the car for the first time in about 2 months and it took it a while to start. I put a fuel pressure gauge that goes to the cowl panel to monitor fuel pressure from the shrader valve. I also put on a kirban adjustable fuel pressure regulator. well when I start the car...
  14. kpack5982

    Getting ready to replace head gaskets...any tips?

    +1 on the labeling of bags for the different bolts. I used those ziplock zipper bags just to be sure nothing fell out and I tell you it was a heck of a lot easier finding a bag of like 3 bolts than one that may have rolled off the bench or something if I hadn't used bags.
  15. kpack5982

    Mufflers

    here's a link, just to give you an idea http://ls1tech.com/forums/archive/index.php/t-119518.html
  16. kpack5982

    how to tell if my lx used to a gt?

    i was just under my car last night changing to some ULTRACLEARs (which are awesome btw) and saw the foglight plug hanging there. What do you guys do to keep these things from hanging like that? anyone cut em? could you even use them to plug foglights in if you switched to a different bumper...
  17. kpack5982

    Suspension setup suggestions

    wow, wonderful insight! I actually have a buddy who has some lakewoods on his car, but I totally forgot about it. i'll have to give him a buzz and find out, but judging by the specs, looks like something I'm interested in. Thanks for the help!
  18. kpack5982

    FYI Pinks episode airs tonight

    yeah, Rich is gay. In fact I have a friend who he reminds me of to the T. Acts like he knows what is going on, but doesn't have a clue... how about when he dumped that crotch rocket? :rlaugh:
  19. kpack5982

    Suspension setup suggestions

    I know there is all kinds of info via a search, but I'm looking to narrow down my choices. So here goes the questions: I am going to get some steeda full length subframes. They are a little more pricey, but I think they are actually more "form fitting" than some of the cheap knock-offs. Is...
  20. kpack5982

    FYI Pinks episode airs tonight

    357 with garrett turbo, what size? any links to the build?
Top Bottom
Back
Forums
Menu