Search results

  1. J

    I need a your long coil wire 94-95

    I bought a set of 100 mile used red ford racing spark plugs for my 1992 GT...it did not come with the longer red coil wire...the 1994-95 cars dont need the longer coil wire...I NEED YOUR RED FORD RACING COIL WIRE...contact [email protected] ...or leave post
  2. J

    endlink torque

    What is the torque specs for endlinks on a 1992 gt???
  3. J

    Why is running open headers bad...

    sooo..i have a gutted h pipe on my 92 5.0 with no mufflers after the h pipe. i have been working on the car the last two winters. Last winter i would start the car once in a while. So this summer when i took off the mufflers, they were filled with water. the condensation built up in the...
  4. J

    Tach Questions....stuck At 3k

    WOW..ITS FIXED...i re-soldered the connections on the top right. the solder looked burnt so i re melted it and it worked..YES thanks all who put there feedback
  5. J

    Stock tach only does 3k and up

    were the resistors that were shot on the top right of the back of the tach? Cuz i have the same problem and cevtv has already told me what he did..thanks
  6. J

    Ppi Seat Brace..questions???

    any pics of one installed??
  7. J

    Ppi Seat Brace..questions???

    the infamous "gangsta lean" that they get frequently is from the actual seat back splitting the spot welds. I have already fixed the gangsta lean on mine. You have to take the cushion and seat cover off the back and re weld the spot welds of the seat back frame. Some times the seat back can...
  8. J

    Ppi Seat Brace..questions???

    ok left to right..Along the back of the seat or along the front
  9. J

    Tach Questions....stuck At 3k

    :shrug:
  10. J

    Ppi Seat Brace..questions???

    does the brace mount from front brackets of the seats to the rear or left side to right
  11. J

    Ppi Seat Brace..questions???

    In my 1992 GT the front left bolt of the drivers seat has ripped out. Some one told me about a PPI reinforcement plate, but the description says its for the back of the seat..DOES ANYONE HAVE THIS???? PPI floorpan reinforcement plate, reinforces the crack-prone floorpan area under the rear...
  12. J

    What causes inner front tire wear??/

    cool, but my car isnt even lowered...stock suspension..so my car should be good after an aligment..
  13. J

    Tach Questions....stuck At 3k

    hey cevtv, where are you??
  14. J

    Tach Questions....stuck At 3k

    what you mean apart?? did you take the glass off and actually take the tach out of the housing? Or are you talking about the back of the cluster? Mine is not brown? Yours must really be burnt..that suxs..
  15. J

    Tach Questions....stuck At 3k

    hey, cevtv i took out the cluster. What do you mean re soldered ALL the connections. What are the little silver stainless clips, Do they come out? Where exactly did you solder? Did you use an ohm meter to check connections? Did you end up takin this green sleeve with the circuit board off...
  16. J

    interchange ford steel rims

    so is the temp/topaz or the cougar/t-bird closer to the correct mustang backspacing and rim...Which would you get if you cant get a mustang rim??
  17. J

    Tach Questions....stuck At 3k

    post your results for this fix..thanks
  18. J

    interchange ford steel rims

    any specific years??
  19. J

    interchange ford steel rims

    I have a 1992 GT 4 lug with 16inch ponys. What other ford vechicles could i take a steel rim from and it will fit my mustangs bolt pattern? Taurus, Tempo, Thunderbird???
  20. J

    tach problems..

    http://forums.stangnet.com/showthread.php?t=589821
Top Bottom
Back
Forums
Menu