Search results

  1. J

    motor jumpy and stuttering after explorer intake install

    getting about 12-14 at idle (about 700) rechecking all lines. is this the vacuum check valve and does that stay on when the smog and egr is removed? current upper intake connections.
  2. J

    motor jumpy and stuttering after explorer intake install

    using 98 upper and lower. all torqued to specs. used explorer 19# injectors. all new gaskets, stat. cleaned rotor connectors on dizzy. added fuel injector cleaner. smog pump was removed and egr disconnected. vacuum lines that are connected to the upper intake are pcv, vacuum tree, fpr, and...
  3. J

    oil pan removal

    i'm not trying to lift the engine either. especially being that i havent done that yet and not trying to get that experience on my car just yet. does anyone know if the single sump pan can get put in with the engine in place?
  4. J

    oil pan removal

    does the engine need to come up for the stock double sump pan only? i've got a small leak at the oil pan gasket that i would like to replace soon but if it entitles lifting the engine, it will have to wait even longer. i was wondering if the single sump pan can be put in with the engine where...
  5. J

    Let's play, name that part!

    the green one is 3/8 npt. just tapped one yesterday on a 98 explorer lower.
  6. J

    Smog Pump Delete

    a cap on mine seems to work. the bolt on the driver side is a pita to get at. i couldnt imagine trying to get one on. i'm waiting until the heads are replaced also. good ol sunshine state with no emissions test.
  7. J

    lower intake alignment

    good idea. dont put them in all the way so they can be turned out and a new bolt put in.
  8. J

    Explorer intake on 93 GT

    another question, my egr vacuums are currently not hooked up. since the car is working fine with out it, can i just put the tb right up to the upper without the egr spacer? or is it a better idea to keep and run everything for the egr?
  9. J

    Explorer intake on 93 GT

    3/8 standard machine thread?
  10. J

    Explorer intake on 93 GT

    hope this isnt old news brought up but i'm wanting to do this by this weekend. a part mentions to move the act sensor to the airbox. i currently am using the stock air box but eventually going to cai (fendermount) would that still somehow be possible or am i better of tapping a hold for the act?
  11. J

    clutch drivetrain problem

    is there a diffence in bellhousings for 4cyl trans and t5 8 cyl trans?
  12. J

    clutch drivetrain problem

    I bought a 88 Gt Conv. from a guy on the east coast of FL. I am a up and coming mustang mechanic (lol a beginner, not a pro) I was driving it home to the west coast of FL. The transmission locked up and had to tow home. Put a new (used) t5 trans, new RAM clutch kit (disk, pressureplate...
View older results
Top Bottom
Back
Forums
Menu