Search results

  1. F

    500hp from SLP

    Sarcasm, Look it up in the dictionary. As far as a little history about myself, I am 37 have been building cars since I was 15. Professionally for the last 12. I specialize in mostly 60 and 70's musclecars. alot of the cars that leave my shop go out and take top honors in some big car...
  2. F

    500hp from SLP

    Just the facts. I made more power then you with the stock air box and just a kn filter installed and all I did was remove the air sliencer. Dont be jealous. Not a salesmen either I could care less what you buy and dont. But the purchases you made were obviously the wrong ones. Does SLP make...
  3. F

    500hp from SLP

    Believe what you will but I have seen personally that they do not produce anywhere near those numbers. Read all the magazine articles you want. It is a bunch of crap!! What I learn from personal experience and seeing with my own eyes I am just relaying to everyone here so no one goes out and...
  4. F

    So who needs TCP?

    Nice stuff! Good Luck with it.
  5. F

    Need Help from 427 stroker owners!

    It is very hard for me to believe that you have encountered a problem. I aways ran a 750 dbl pump on 400cubic + small blocks and never had a problem. Are your secondaries opening soon enough? Maybe a vacum leak?
  6. F

    500hp from SLP

    With the full length headers, x-pipe with high flow cats, and the cat back Loud mouth system the car made 430hp and 420 ft lbs of torque and it does sound mean as hell!!!!
  7. F

    500hp from SLP

    Got a call from slp. My car went back for more of their goodies for the 03/04 Cobra. The car made 500+ horsepower and 530+ ft lbs. This is what they did. Complete exhaust system with longtubes,x-pipe, and loudmouth cat back, MAF, pulley, Diablosport tune and KN air filter. No not the CAI...
  8. F

    He He he he

    Very nice!!!!! She sounds sweet!!!
  9. F

    67 428 radiator

    I used a 68 428cj rad in my 66 with a 408 small block making just under 600hp and a electric fan and it worked great. I nver had a problem with it running hot as a matter of fact the car would run at 180 degrees constant no matter what the conditions were. But now I use fluidyne radiators in...
  10. F

    Pros and cons of a solid roller cam?

    I also run solid rollers exclusively in every motor I have put in one of my cars never had a problem. I like working on my cars so the adjusting thing does not bother me a bit and I rarely had to adjust more than once or twice a year and most of the time it was just one or two valves and thats...
  11. F

    Just purchased a 65 fastback.

    Good luck with it I also hope it is something simple. It could also be because it has sat for a long time and driving might help this problem by itself but that could be wishful thinking.
  12. F

    Just purchased a 65 fastback.

    A compression test is different than a leakdown test but thats a good start. If your numbers average on the low side than you know the rings are the culprit.
  13. F

    Just purchased a 65 fastback.

    By the way 65 coupe Good luck with your new car I hope you enjoy it.
  14. F

    Just purchased a 65 fastback.

    And lets not fix this problem with the starter, just dont by gas. Yeah there is some good advice
  15. F

    Just purchased a 65 fastback.

    He said that it is not noticable when driving, that means its running doesnt it? Wont hurt to do a leakdown test though. Or he can just tear the motor apart and re ring it or just rebuild the whole freaking thing, I would do the leakdown test first, but what do I know?
  16. F

    Just purchased a 65 fastback.

    Do a leakdown test on each cylinder. It could be your valve stem seals. this is alot cheaper to fix then replacing your rings. I would do the leakdown test first. Also how do you know your battery is good, it could have a cell going bad. Replace the selonoid, recheck all your connections...
  17. F

    DON'T BUY GAS ON MAY 19TH!!

    By doing so all your going to accomplish is hurting the little guy that owns a private station or rents one from the big guys.
  18. F

    Taking the body off the frame

    There is nothing to lift off. If you cut out the front frame sections and remove the rear frame rails thats all the frame you have. Make sure you leave the floor sections where you cut the rails off. I hope a proffessional is doing this, because if you did not know the stangs are a unibody...
  19. F

    Electric Door Lock Installation?

    Very informative great pics too, Thanks
  20. F

    Black rims?

    Stockton wheel service. Do a search they are on the web.
Top Bottom
Back
Forums
Menu