Search results

  1. mfp4073

    Lots of vibration from my newly purchased fastback (3000-4000rpm)

    need more info. You say it vibrates at that rpm, but in gear or out of gear? Will it vibrate while sitting still.....by just revving the engine up? If so have you tried pulling spark plug wires one at a time and found one that does not change the way it runs? Any plugs fouled? tried jacking...
  2. mfp4073

    Adjusting carburetor

    NOOOOO DONT GIVE UP! This stuff is only hard if you dont try! Can you take a picture of your carb?
  3. mfp4073

    why 620's over stock springs

    dang, I knew I hung around here for a reason! Been doing this crap for almost 20 years and here I go and learn something new!
  4. mfp4073

    Adjusting carburetor

    I know holleys better than anything else, but I think the screws you are referring to are the idle mixture screws. Basically once you put your foot on the throttle it goes to the main metering circuit. I dont know how for did it for the factory style carbs. It will either be replacable...
  5. mfp4073

    Stripped out engine bay

    Let me say from experience that its a bitch to go back to metal. All the nooks and crannies make it a lot of work. BUT it is soo worth it to be finished with. Just a bit of advice or experience. I went with an exterior gloss black instead of the factory finish. It makes it SOOOOO much...
  6. mfp4073

    Can I put 31 spline axles in an 8"?

    I might be off with this, but I kinda got this idea from when I was doing research on upbuilding my 9inch open rear to a traction loc with new axles. Someone correct me if I am wrong here, but orginally they were doing those big 31 spline axles because the smaller 28 spline axles were weaker...
  7. mfp4073

    why 620's over stock springs

  8. mfp4073

    5.0l swap problem!!(pics)

    That I cannot tell you. I went with a classic style v belt setup. I had to get a new timing chain set as the old eccentric would not clear the cover.
  9. mfp4073

    5.0l swap problem!!(pics)

    Yep, use the early timing chain cover with the dipstick provision. There may be some issues with the mech fuel pump lobe not clearing. But thats what it takes. Just plug the old hole.
  10. mfp4073

    Is this ok?

    Check your local auto parts store. You can get rebuild kits that have all those springs and stuff in them for really cheap. I think I last got one for my rears that was only like $12 for both sides.
  11. mfp4073

    New rims and tires today....will 265/50-15s fit?

    265/65-16=29.6" 265/50-15=25.4" Now that being said, I am not so sure about the rears being too big to look right. I am looking at the fronts and thinking they may need to be bigger. No rubbing so far, but i have not driven them much. I am still debating going back and swapping some stuff...
  12. mfp4073

    New rims and tires today....will 265/50-15s fit?

    well dang....cant make the p-nut gallery happy! I just upgraded to 15x7 rims and really didnt know what I could and couldnt do. I am having all sorts of traction problems. I have not had any bottoming out problems (pretty limited driving, but did go over some of those big/wide type speedbumps...
  13. mfp4073

    A "SuperDave" fly-by!

    :nice: Good to hear from you from time to time, even if it isnt every third post!:rlaugh:
  14. mfp4073

    New rims and tires today....will 265/50-15s fit?

    Old: new (I will get better pictures when its not pouring) :D
  15. mfp4073

    New rims and tires today....will 265/50-15s fit?

    Answer is YES.....didnt think they would fit but they do. Heres my rundow: 67 coupe shelby drop, 1 inch front drop springs stock (worn out) rear leafs front fenders lip trimmed 15x7 ss rims mastercraft tires 225/50-15s front 265/50-15s rear didnt have a chance to get pictures...
  16. mfp4073

    Removing overspray from tires...

    so are we talking on the rubber or on the rim?
  17. mfp4073

    Removing overspray from tires...

    000 or finer steel wool. Corser stuff and the brillo pads can scratch. Choke/carb cleaner will not hurt the rims either. Brake fluid is pretty hard to keep contained.
  18. mfp4073

    (Doofus Award)broke a piston ring

    hehe, I have not heard of the dufus award for a couple of years now!
  19. mfp4073

    Price of going faster!

    You are seriously just trying to add to the cost by adding it up. After realizing what you have done all you will do is end up on antidepressants and in therapy!
  20. mfp4073

    I have a couple questions

    That is it right there. The gas companies try to sell you all kinds of BS to spend more money.
View older results
Top Bottom
Back
Forums
Menu