axle

  1. G

    1967 mustang 9" Limited slip issue 28 spline

    Any one knows if a limited slip, should always have retaining rings at the old clutch pack assembly, as I opened mine up to check and spot there's none with, so I,m not sure if every type should have these or not also it didn't have any shims within the clutch assembly either not even the two...
  2. C

    8.8 rebuild and clutch

    Hey guys, I live in Seattle WA and am looking for recommendations on people or shops that can rebuild my 96 GT 8.8 with 31 spline and regearing as I have a bent axle shaft and might as well completely rebuild it. I also need my clutch replaced. I was quoted $1200 on the clutch and ball parked...
  3. Noobz347

    Administrative Ford Super Duty Axle Recall - Read and Pass Along

    Putting this here just so that the word gets out: View: https://www.youtube.com/watch?v=pmKR5UKoVoQ&ab_channel=BigBoyToyz
  4. 5

    Rear end gear noise

    I have an 87 mustang. So little over a month ago I had a set of rear gears installed. When i got the car back the shop said there was a slight whistle when decelerating/coasting. Now I've had a couple people tell me that's normal. And when I first got the car back if i remember correctly the car...
  5. C

    For Sale Moser 8.8 Complete Rear End

    I have a brand new Moser 8.8 rear end for sale. Comes with...... 35 spline Axles Strange Spool big bearing ford flange bearing kit and had the entire housing powder coated semi-gloss black.\ Widened 2.5" over stock to 56" flange to flange. 3.55:1 gears. Currently unassembled, but I can...
    • CobraNav
    • Thread
    • 8.8 ford axle cobra differential drag racing drifting fox body moser rearend sn95
    • Replies: 3
    • Forum: Drivetrain Parts
  6. A

    Limited Slip Rear End Grinding and Whining

    03 GT traction lok rear end. When turning, either direction, the rear makes a muffled grinding sound under acceleration (imagine two stones grinding on each-other in a circular motion), and a whining sound without acceleration (kind of like a dry door hinge but muffled). There is no sound until...
  7. B

    90 Lsc Rearend In A 89 Fox Lx

    Ive read many threads about an lsc rear end swap but cant keep everything straight but I have an 89 LX Hatch that's originally a 2.3 but im swapping a 5.0 into it and a 90 lsc as my parts car. What exactly do you have to do to be able to run the 8.8 from the lsc in a fox? Im going to be running...
  8. Alpine615

    Drivetrain Driver's Side Axle Shaft Not Seating Properly In Diff

    Hey all, my name is Steve and I'm new here. Technically I do not own a Mustang II, but I have an 8" rear end from one that's going into my Pinto. I figured this would be the best place to get help. Thanks in advance... I had the axles out to be drilled for 5 x 4.5" bolt pattern, with new...
  9. D

    Sos!! Need Help With An 83

    Hi all, New to the forum, just picked up my first foxbody. It had a blown diff, so I replaced it no sweat(except losing one of the axle retainers for about an hour) and I go to pull the fill plug and the thing is nearly impossible to get a good angle on without dropping the axle it seems. I have...
  10. 2010 Ford Mustang GT Takeoff With Pypes Violator Exhaust Spinning through 1st and 2nd Gears!

    2010 Ford Mustang GT Takeoff With Pypes Violator Exhaust Spinning through 1st and 2nd Gears!

    Takeoff video of my 2010 Ford Mustang GT with a Pypes Violator Axle Back Exhaust installed. In the video, you can hear the car spin 1st and 2nd gear pretty good. I liked the Pypes Violator Exhaust sound, but wanted more volume so I eventually switched to the Pype Bomb Axle Back. But anyway let...
    • iceguyb14
    • Media item
    • 1st 2010 2010 mustang 2010 mustang gt 2nd 46 axle back deep exhaust fast ford ford mustang gears launch loud muffler mufflers mustang mustang gt new pypes pypes exhaust pypes violator quick raspy rumble spin spinning takeoff violator
    • Comments: 0
    • Media category: Exhaust and Burnout
Top Bottom
Back
Forums
Menu