Can anyone shed some light on what will have to be changed. Both cars are manuals, the 97 has the t45 and the 02 has the 3650. From what I understand the 97 has a 10.5" flywheel and clutch and the 02 has a 11" flywheel and clutch. I plan to get a new flywheel and clutch kit but I'm unsure on...
I recently had a remanufactured t45 transmission from xtreme performance put into my 2000 Mustang GT. I also have a new stage 2 Kevlar clutch kit installed as well. The problem is my transmission grinds from 1-2 and 3-2. If I’m slow and really gentle it’ll go into second from first without...
Hey y’all, my input shaft bearing exploded in my transmission... i’ve never worked on the internals of the t45 before and was wondering if there was any way to just pull the bearing out instead of removing the whole shaft. but if i have to remove the whole shaft how do i do that? THANKS. if...
Does anyone recommend any good transmission rebuild books? I currently have my T45 completely apart in my basement and I'm trying to figure out what needs to be replaced and what I can keep. There doesn't seem to be many online resources or maybe I'm just bad at Googling. Anyways, if anyone has...
Good Morning Everyone,
I figured I would make a post about this and see if anyone else has had this happen. I have a Late 2001 Mustang GT and I believe my car has the T45 transmission. The issue is my car is the late 2001 and the vin even says it should have the T3650. I have had the car the...
Hello, so i know this subject has been mentioned before, but i was going 1st to 2nd gear fast in my 2000 mustang gt (t45) and when i hit 2nd it was almost like i lost the gear completely and at first i could use 3rd 4th and 5th then at a stop light i tried to use 2nd again and it locked me into...
Hey all,
I am brand new to the forum and I'm not sure if this is exactly where I should be posting so bear with me please!
I replaced my clutch kit assembly on my 1998 Cobra, and I want to know how exactly the clutch fork should operate. It sits on that retaining nub in the upper left corner...