tensioner

Hey all! I've had a squeal that's progressively gotten worse and lead me to replace the idler pulleys recently. I took another look with the belt off and can obviously see that it's rubbing the engine block when it's running over the tensioner, as in it doesn't stay on the tensioner enough and...

04 gt, just replaced my belt and idle pulley, I dont know what I did, but the belt tensioner is rubbing on the timing cover, my belt routing looks good, my idle pulley looks fine, I think from pulling the tensioner and it being OEM it might just be worn, I adjusted everything and it doesn't run...

If interested, please contact me via email at [email protected]. I'm based in Phoenix, AZ. Ford V8 Cam Tool Kit 6498 by OTC. Includes: -525216 Camshaft Positioning Tool -525217 Camshaft Holding Tool -525218 Secondary Timing Chain Tensioner Tool -525219 Crankshaft Positioning...

Setting the timing on an 04 gt, before taking off the chains I set to tdc and marked chain at cam mark and the 6:00 mark on the crank. My chains had no visible links to differentiate but after the chains came off the 2 marks lined up at opposite ends so I felt confident in that. I also marked...

So I recently replaced the tensioner pulley because it had a slight squeal on startup an was bothersome. It ran sooth until a week later when I started it up the thing was squealing like crazy. But with the engine running when I push the tensioner arm back (towards the engine) it stops...