01 bullit , wiring issues, PATs

[tmorgan]

Red wire from fuse 2 bubbled up. PCM won't turn on re ran red wire still can't seem fix it. 2001 mustang gt bullit , i was putting touch screen in and thats what started it

 

[wmburns]

So that I can help you please refer to the fuses as in the following post.

BUT one can expect that IF the insulation on the wire has bubbled up it's a sign of over loading or short.

1999-2004 MY fuse panel schedule:

1999 Mustang GT with 2001 motor swap, wont fire. Please help

First off thank you for taking the time to read this, I hope that you will be able to help me out in some way to get a 4 month project off the ground and back onto the streets. I'm not a master mechanic but know just a little bit, enough to do your typical maintenance, overhauls, and swaps. I...

www.allfordmustangs.com

In the crank with no start check list note the parts about fuse F2.34, F2.2 and F2.8.

1996+ Crank with no start check list

1997 mustang wont ignite

Hello lets start with I have a 97 mustang gt v8 standard I had new engine transmission ect put all new well last month i shut the car off and had no power at all bought a new battery and alternator got all power back but it wont ignite brought to mechnic for a month all sensors codes ect are fine

www.allfordmustangs.com