them seats suck!Melvin_91GT said:I have a set of '01 GT leathers that I've had in my car for going on 2 years now. They really have settled nicely, though they're still firm enough to provide ample support and stability.
They're leaps and bounds better than the crappy Fox seats were -- And the driver's seat is 6-way power.
I just unbolted the seatbelts off the 03 seat and used the stock seatbelts.dreddstang said:Adam and nitto88,
What did you guys do for the seat belts? I noticed looking at his car tonight that the buckle end of the belts are attached to the seat. In the Fox car they are bolted to the floor. If there is no provision for the buckle on his new seat what would you guys do?
He is getting the black/ yellow APC seats, if I have not mentioned it already.
nito88stang said:The only drawback of these seats is that they render the armbrake cupholder a bit useless. lol.
Because these seats arent as wide and thus the newer seats dont squeeze against the center console like the stock ones do.cardudeusa said:Its hard to tell from the pic, but why is the beloved cupholder useless?
nito88stang said:Because these seats arent as wide and thus the newer seats dont squeeze against the center console like the stock ones do.
Cool, cant wait to see it.dreddstang said:Hmmm. Never thought about that. I try not to eat/ drink in the car anymore though. Especially now that I'll have all this new stuff in.
Got the seats, console, hatch carpet, factory amp, kick panels and door sills out today, but got stuck on the seat belts! Don't have a torx bit the right size, so I could not get the seat belts out to get the passenger area carpet out. Tonight when I get off work a buddy is gonna meet me at the house and give me one. Then I will get the carpet out so in the morning I can cut all the holes I need in the new carpet (shifter, ect) and put it in.
Hopefully I will have everything ready Monday so when the seats show up I can just bolt them in!
Took lots of pics, will post them later.
When you take your carpet out be very careful and on the passenger side under where the seat is, you can sometimes find your cars build sheet. I've found it on two stangs and the words were still sorta readable. On mine tho only a tiny piece was left and it was all water damaged.dreddstang said:Hmmm. Never thought about that. I try not to eat/ drink in the car anymore though. Especially now that I'll have all this new stuff in.
Got the seats, console, hatch carpet, factory amp, kick panels and door sills out today, but got stuck on the seat belts! Don't have a torx bit the right size, so I could not get the seat belts out to get the passenger area carpet out. Tonight when I get off work a buddy is gonna meet me at the house and give me one. Then I will get the carpet out so in the morning I can cut all the holes I need in the new carpet (shifter, ect) and put it in.
Hopefully I will have everything ready Monday so when the seats show up I can just bolt them in!
Took lots of pics, will post them later.
nito88stang said:When you take your carpet out be very careful and on the passenger side under where the seat is, you can sometimes find your cars build sheet. I've found it on two stangs and the words were still sorta readable. On mine tho only a tiny piece was left and it was all water damaged.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?