• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

12v power wires

  • Thread starter Thread starter kpack5982
  • Start date Start date Sep 10, 2007

kpack5982

Yeah, it was pretty stiff, but eventually a buddy
Jul 13, 2005
325
1
19
Granger, IA
Sep 10, 2007
#1
  • Sep 10, 2007
  • #1
Ok I have all the wiring hooked up for my mark viii fan, but the wire to the 12v key on power source, I found online to splice into the maf sensor 12v key on, which wire is that or does anyone recommend a different wire to splice into?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 10, 2007
#2
  • Sep 10, 2007
  • #2
If you are good with electrical stuff (90% of the people here aren't), build your own controller. The numbers on the diagram (#86, #87, etc) refer to the numbers on the bottom of a typical automotive relay.



If you are an experienced electronics tech or electrical engineer, email me and it will send you the prototype drawings of a fan controller that is probably as good as the DC Control unit. It is a build it, troubleshoot it yourself item. I will not build or troubleshoot units, so it is not suitable for anyone who isn't really good with electronics.
 

kpack5982

Yeah, it was pretty stiff, but eventually a buddy
Jul 13, 2005
325
1
19
Granger, IA
Sep 10, 2007
#3
  • Sep 10, 2007
  • #3
well I am going to wire it up with a controller, but it won't come for a month so I have it set up so the power comes from the battery, but the switch to have it turned on right now is going to come from the 12v on from the maf like i got from a site, I just don't know which wire is the 12v key on wire that goes to the maf.

This is the site I got the wiring from

http://members.tccoa.com/392bird/markviii.htm
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Sep 10, 2007
#4
  • Sep 10, 2007
  • #4
Don't take power off the MAF wire. Last thing you want is slight power surges on that sensitive peice of electronics

Go to the other side of the engine bay and look for the coolant plug. If your car doesn't have a low coolant sensor in the overflow, the plug end will be hanging from the headlight harness. Its a 12V key on power source that can spare a little extra juice
 

kpack5982

Yeah, it was pretty stiff, but eventually a buddy
Jul 13, 2005
325
1
19
Granger, IA
Sep 10, 2007
#5
  • Sep 10, 2007
  • #5
alright that works for me, which color wire from that is the key on 12v wire?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Sep 10, 2007
#6
  • Sep 10, 2007
  • #6
Usually red. I beleive there are only 2 wires going to it anyway. I don't remember off the top of my head the color
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 11, 2007
#7
  • Sep 11, 2007
  • #7
Only use the existing wiring to supply power to a relay coil. The fan draws 30 amps: none of the stock wiring is big enough to supply that much power. Use one of the existing wires that are designed to carry 5-10 amps and you will have a fire or melted wiring.

As suggeseted, if you want switched power for the relay, use the coolant level sensor on the overflow tank. A voltmeter or test lamp will help find which wire is powerd up when the ignition switch is turned on.
 
You must log in or register to reply here.

Similar threads

T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
220
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
F
3G Alternator install question
  • fathead429
  • Oct 24, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
7
Views
261
1974 - 1978 Mustang II Talk & Tech Oct 25, 2026
LILCBRA
8
Electrical Crank-no start ... no spark ... no injector pulse, was it something I did? (redux)
  • 85gtCOBRA
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
688
Fox 5.0 Mustang Tech Oct 29, 2025
85gtCOBRA
8
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
518
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?