Need a power supply for the arming switch on my nitrous system. The directions call for a 12v switched power supply, and I really don't know how to figure out what would qualify for that.
Any help is appreciated... this is the last thing I have to wire up I believe...
The convertable top power harness which is right by the shifter under the center console. It comes on when the key is on acc or "on". I have my radar detector running off of it.
The convertable top power harness which is right by the shifter under the center console. It comes on when the key is on acc or "on". I have my radar detector running off of it.
Is it that cluster that clips into the back of the shifter bezel if you don't have a convertible? I cut it's mounting clip off so I could mount my switch in the shifter bezel, lol.
If that is it, which wire? I was eying that, but had NO idea what the hell it was. I figured traction control possibly. I saw a pinkish wire in there... but they are all very small.
When I installed the radar detector power in my car I used the open spot in the fuse block that is reserved for daytime running lights. This is switched by the key so when I turn on the car the radar detector comes on. It is very easy to do this.
I suggest you run a line off the fuse block using the daytime running light fuse position. Unless you have a Canadian car that spot in the fuse block should be available and is absolutely switched.
When I installed the radar detector power in my car I used the open spot in the fuse block that is reserved for daytime running lights. This is switched by the key so when I turn on the car the radar detector comes on. It is very easy to do this.
I suggest you run a line off the fuse block using the daytime running light fuse position. Unless you have a Canadian car that spot in the fuse block should be available and is absolutely switched.
Can you tell me where that spot is at? Is it on the drivers or passengers side fuse box, under the hood? I tried looking for a diagram but couldn't find it in the owners manual, or one I could actually understand in the Haynes manual.
The convertable top power harness which is right by the shifter under the center console. It comes on when the key is on acc or "on". I have my radar detector running off of it.