• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

1970 Mach 1 Tranny Leak Question

  • Thread starter Thread starter 04mustang70
  • Start date Start date Mar 21, 2014
0

04mustang70

Member
Jun 27, 2007
88
0
7
Twin Lakes, WI
Mar 21, 2014
#1
  • Mar 21, 2014
  • #1
Hi all! I have a 1970 Mach 1 with a 351W and a FMX Trans. I have owned this car for about 30 years and drive it fairly often in the summer months. My problem is there has been a slow leak coming from the front of the bellhousing when I park the car. It drips a few after parking then stops. I have some skills in wrenching but less in diagnosing. Could this leak be from the convertor? I know theres fluid in the converter and if it is leaking are there seals that need to be replaced or do you just buy a new converter? What else could it be? Im sure theres a front seal for the transmission shaft that could be leaking? I think it could be the converter because after sitting for a while it takes the car to go in gear after putting it in gear especially reverse. Any help is appreciated as I plan on dropping the transmission soon to fix this leak that has been there for quite some time.
 
D

dewdrop

Member
Oct 9, 2005
62
1
9
East Tenn
Mar 21, 2014
#2
  • Mar 21, 2014
  • #2
Just had the same issue on my FMX. Not the leak but the "won't go into gear right away" It's the seals bad and some of them are inside. I pulled my trans and had all the seals replaced and the converter rebuilt. Cost about $900 and my labor to pull. Don't think there are any shortcuts.............

Good luck
 

horse sence

15 Year Member
Nov 29, 1999
12,398
8,321
233
Wile Coyote's stunt double
Mar 21, 2014
#3
  • Mar 21, 2014
  • #3
sounds like may be the filter needs to be changed . the leak is probably from the front seal ,the trans. has to be pulled to replace .It is easy to replace ,it pulls out from the front ,do the tail shaft seal as well.
 
0

04mustang70

Member
Jun 27, 2007
88
0
7
Twin Lakes, WI
Mar 21, 2014
#4
  • Mar 21, 2014
  • #4
Thanks all for the response. Looks like I will pull it and inspect further. Thanks again!
 
You must log in or register to reply here.

Similar threads

C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
284
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
D
96 get convertible-sell or part out?
  • DTCstang
  • May 17, 2026
  • What is it Worth?!?!?
Replies
5
Views
226
What is it Worth?!?!? May 18, 2026
nickyb
S
Fox Another try for the European guy to get his first Fox
  • Schargedfox
  • Aug 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
309
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 4, 2026
DadLife0724
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
17
Views
805
SN95 V6 Mustang Tech Aug 29, 2026
joeybuddy96
J
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
419
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?