I'm having I believe a common problem with my mustang. I went to redo my whole a/c system including the Evaporator which I had to take out the dash for and once I put everything back the car will not start. I've done a lot of research on here but I guess I have not found my problem.
I've used all these plus some others as reference.
http://www.stangnet.com/mustang-forums/756930-car-wont-start.html
http://www.stangnet.com/mustang-forums/814372-no-power-red-green-wire-ecc-power-relay.html
93 EEC Relay - MustangForums.com
My fuel pump runs continuos, will not stop running. I have no power at the fuel injector wires...I have constant power when I turn on the ignition, but once I try starting the car I get no pulse signal. I have verified power to the EEC relay above the ECM and I'm getting 12v there. I have changed out the fuel pump, verified power to the inertia switch in the trunk. I'm also not getting power to the TPS. I have verified that all the wires around the ignition are snug in the connector.
The car ran great with no problem before this and hopefully it will continue to run great once I get this figured out with help. I have tried averything I know to do and also things from the info on this site.
Thanks
Chuck
I've used all these plus some others as reference.
http://www.stangnet.com/mustang-forums/756930-car-wont-start.html
http://www.stangnet.com/mustang-forums/814372-no-power-red-green-wire-ecc-power-relay.html
93 EEC Relay - MustangForums.com
My fuel pump runs continuos, will not stop running. I have no power at the fuel injector wires...I have constant power when I turn on the ignition, but once I try starting the car I get no pulse signal. I have verified power to the EEC relay above the ECM and I'm getting 12v there. I have changed out the fuel pump, verified power to the inertia switch in the trunk. I'm also not getting power to the TPS. I have verified that all the wires around the ignition are snug in the connector.
The car ran great with no problem before this and hopefully it will continue to run great once I get this figured out with help. I have tried averything I know to do and also things from the info on this site.
Thanks
Chuck
