• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Electrical 1997 - Alternator Blowing Fuses and Fusible links

  • Thread starter Thread starter TNMoonshiner
  • Start date Start date Mar 24, 2018
T

TNMoonshiner

New Member
Mar 24, 2018
1
0
1
Mar 24, 2018
#1
  • Mar 24, 2018
  • #1
Hello All, I have a 1997 GT that my son and I rebuilt (wrecked front). After rebuilding the front end, we installed a new battery and had the alternator checked to make sure it was charging. My son had been driving the car for a month with no issue, and then an electrical gremlin popped up.
He said that he started the car and heard a loud pop, and then saw a little smoke from under the hood. We found that the fusible links from the alternator had blown, and we replaced them with an inline fuse.
Took the alternator to a local shop for a bench test and it was bad. Bought a new one, had them bench test before we left store and it was good to go.
Installed the new alternator and new fuse with no issue. After about 20 minutes of driving the fuse blew again. I've searched through the forums, but can't seem to find a link related to this issue.
Any help would be greatly appreciated.
 

Neuron

5 Year Member
Nov 6, 2016
859
192
93
Mar 25, 2018
#2
  • Mar 25, 2018
  • #2
Are you sure the fuse rating is the same as the fusible link(they use a fusible link for a reason(I would dump the fuse and get the fusible link installed..
Front end damage could have possibly damaged some wiring, I would go over the wiring using a schematic to track it down.
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Mar 25, 2018
#3
  • Mar 25, 2018
  • #3
My vote is that the insulation is damaged on the main B+ cable perhaps where it has been routed over something metal. Over time the wire is grounding out and blowing the fusible link.

If you can't find anything look close at the alternator connector itself. See the video from SMA Auto on how this connector might be overheated.

Here's some more information that might be of help.

Howto perform charging system voltage drop test
https://www.stangnet.com/mustang-fo...perform-charging-system-voltage-drop-test.56/
 
Reactions: TNMoonshiner
You must log in or register to reply here.

Similar threads

Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
104
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
A
Resolved 03 GT Parasitic Draw Fuse 26 (PCM)
  • Antrix
  • Mar 22, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
752
SN95 4.6L Mustang Tech Mar 24, 2025
89ripper
A
Resolved Electrical Help Please
  • Alabama
  • Jan 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
300
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 22, 2026
AeroCoupe
G
Help! Radio, door chime fuse keeps blowing.
  • goofyfoot53
  • Sep 9, 2025
  • 2.3L (N/A & Turbo) Tech
Replies
1
Views
304
2.3L (N/A & Turbo) Tech Sep 9, 2025
91AOD5.0LX
1976 Cobra II fuse problem - Solved (I hope)
  • Rick Tanner
  • Jan 8, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
2
Views
282
1974 - 1978 Mustang II Talk & Tech Jan 8, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?