19lb injectors or more?

[srjs28]

will 19 lb stock injectors and MAF support gt-40 heads, trickflow trackheat intakes, possibly F 303 cam (fell into my lap may go with another cam) and larger throttle body? or would it be better to start with fuel rails, pump and fuel reg before upgrading injectors (if needed). thanks for any info. im new to forum and mustang world. - Joe

 

[Tanus]

definatly a 190lph pump, stock rails are fine. your kinda borderline between the 19 and 24 injectors though. I got a set of 24lbs and 73mm maf I'm gonna sell pretty soon if your interested, still on the car right now.

 

[srjs28]

yea, let me know on the injectors and maf. thanks

 

[Tanus]

will do, I was thinking like 150 shipped. ford motorsport injectors and C&L meter. should have my new injectors and maf by friday.

 

[1987stangman]

I have thumper e7's, TFS stage 1 cam, stock maf and a cobra intake and although the 19's do seemingly ok I think upgrading to 24lb injectors and maf would help out a lot.

 

[Sicarius428]

You should be ok with 19s though it will be close. You may want to get an adjustable fuel pressure regulator and give it a bump in pressure though.
Kevin

 

[SpartaPerformance]

+1 on the 24's and a 190l/ph pump

 

[srjs28]

will do, I was thinking like 150 shipped. ford motorsport injectors and C&L meter. should have my new injectors and maf by friday.

i will get back with you on the inj. and maf at the end of next week. ive spent too much $ the last 2 weeks on my project and apparently we need to buy food and diapers and stuff.......go figure. but $150 shipped sounds ok i guess. thanks

 

[v8only]

19#s are plenty for that, My bro and I ran the same combo and didn't come close to being lean on the dyno

 

[Tanus]

cool I'll let you know, I'll do it for $130 since you dont seem to enthusiastic about $150.

 

[srjs28]

sounds good