Well I purchased a code reader and conducted the engine balance test. Cylinders 2 and 3 failed this test all three times meaning they are extremely weak or dead. I have replaced my cap/rotor, new plugs and gapped. My wires are in very good condition about 2 yrs old (taylors), and have used injectors in there. Now the car runs too good for the cylinders to not be working and there isnt a miss until it is revved up a bit and warms up. I did throw a code saying my egr was either stuck open or closed but I messed with that trying to plug it and stuff and it didnt make any difference. Please help I just wanna drive my car and it has been months!