• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

$2000, need some help

  • Thread starter Thread starter mavestang98
  • Start date Start date Feb 23, 2009
  • 1
  • 2
Next
1 of 2 Next Last
M

mavestang98

New Member
Dec 31, 2007
2
0
0
Feb 23, 2009
#1
  • Feb 23, 2009
  • #1
Hey guys i have a 98gt. The only thing that i have done to it is just straight pipes going back into flows and then dumped down. Now i finally have some cash to put into her but was needing some help on what you suggest. i was lookin into an offroad h pipe, headers, gears (possibly 3:73 or 3:90 i have the 3:27 gears now). Was wondering what you guys would do if you were in my situation. Thanks
 

evil281

New Member
Jan 6, 2008
276
0
0
Arizona
Feb 23, 2009
#2
  • Feb 23, 2009
  • #2
is it a DD or yu want to make it a track car? id say for gears go with 3.73's on a DD thats wha i would do if install labor was cheaper in my area
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Feb 23, 2009
#3
  • Feb 23, 2009
  • #3
Well first off is it stick or auto? That will help with mod choices!
 
M

mavestang98

New Member
Dec 31, 2007
2
0
0
Feb 23, 2009
#4
  • Feb 23, 2009
  • #4
Sorry, yes this is for a dd and maybe a long term project car. It is a stick as well.
Posted via Mobile Device
 

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Feb 23, 2009
#5
  • Feb 23, 2009
  • #5
3.73's are a good DD gear, the 3.90's are catching on too. A good free flowing exhaust w/ LT's, midpipe and catback would also be a great round of mods. Also look into subframe connectors and a short shifter
 
4

4tun8

New Member
May 1, 2006
172
0
0
Classified
Feb 23, 2009
#6
  • Feb 23, 2009
  • #6
PI Head swap.
 

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Feb 23, 2009
#7
  • Feb 23, 2009
  • #7
4tun8 said:
PI Head swap.
Click to expand...

+1
 
M

mavestang98

New Member
Dec 31, 2007
2
0
0
Feb 23, 2009
#8
  • Feb 23, 2009
  • #8
Its a dd for now and a stick
Posted via Mobile Device
 

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Feb 23, 2009
#9
  • Feb 23, 2009
  • #9
You said that
 
M

mijo_latino

Active Member
Apr 16, 2004
179
1
29
Canton, Michigan
Feb 23, 2009
#10
  • Feb 23, 2009
  • #10
do the PI head swap, tune, and gears if there's money left. What I noticed is the the 98 needs the higher rpms. Just with the PI intake and mods in sig the car loves 3000 and over. There is this lame lag bellow 3 that irks me.
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Feb 23, 2009
#11
  • Feb 23, 2009
  • #11
you can pick up a used centri blower for a few hundred more. i'd save and make some REAL power!
 
S

syc_stang

New Member
Jan 30, 2009
1
0
0
jacksonville , fl
Feb 24, 2009
#12
  • Feb 24, 2009
  • #12
you cant do a complete pi swap with only two grand. trust me it cost me closer to 3. just get some long tubes, off road x/h or catted and use your existing flos. i had 3:73s on my 00 gt and they were great over stock. i just bought a bbk lt and x pipe package from texas hot rods for 589 bucks with free shipping ( they are on a slight back order tho).

BBK 96-04 GT MUSTANG LONG TUBE HEADERS & OFF ROAD X PIPE PACKAGE
 

eliteJAE

Member
May 29, 2007
0
1
16
Stanford University
Feb 24, 2009
#13
  • Feb 24, 2009
  • #13
syc_stang said:
you cant do a complete pi swap with only two grand. trust me it cost me closer to 3. just get some long tubes, off road x/h or catted and use your existing flos. i had 3:73s on my 00 gt and they were great over stock. i just bought a bbk lt and x pipe package from texas hot rods for 589 bucks with free shipping ( they are on a slight back order tho).

BBK 96-04 GT MUSTANG LONG TUBE HEADERS & OFF ROAD X PIPE PACKAGE
Click to expand...

3k for a p.i. swap.........

you couldve had a centri blower setup for that much man......
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Feb 24, 2009
#14
  • Feb 24, 2009
  • #14
my buddy did a PI swap with comp cams and springs and spent under $1K!!!

u got screwed
 

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Feb 24, 2009
#15
  • Feb 24, 2009
  • #15
syc_stang said:
you cant do a complete pi swap with only two grand. trust me it cost me closer to 3. just get some long tubes, off road x/h or catted and use your existing flos. i had 3:73s on my 00 gt and they were great over stock. i just bought a bbk lt and x pipe package from texas hot rods for 589 bucks with free shipping ( they are on a slight back order tho).

BBK 96-04 GT MUSTANG LONG TUBE HEADERS & OFF ROAD X PIPE PACKAGE
Click to expand...

eliteJAE said:
3k for a p.i. swap.........

you couldve had a centri blower setup for that much man......
Click to expand...

SaleenGT2001 said:
my buddy did a PI swap with comp cams and springs and spent under $1K!!!

u got screwed
Click to expand...



Agreed, thats outrageous
 
S

syc_stang

New Member
Jan 30, 2009
1
0
0
jacksonville , fl
Feb 25, 2009
#16
  • Feb 25, 2009
  • #16
it cost me a little over 3k, i didnt get ripped off i just got the best stuff that i could. i got the trick flow high flow intake manifold, that was almost half of the money right there, and i got the heads port and polished. i didnt want to get that crappy plastic pi intake. i had to get my computer tuned too. but why even upgrade if your only gonna get baseline performance from your parts. trust me its well worth spending the money like i did.
 

eliteJAE

Member
May 29, 2007
0
1
16
Stanford University
Feb 25, 2009
#17
  • Feb 25, 2009
  • #17
Ooo lol that makes alot more sense, I think I speak for all of us when I say I thought you meant a simple p.i. swap.

Although what you did is sick, it's far from a simple p.I. swap that should run you a good amount under 1k, and it makes for a huge improvement over stock npi.
 
M

mavestang98

New Member
Dec 31, 2007
2
0
0
Feb 25, 2009
#18
  • Feb 25, 2009
  • #18
This might be a dumb question but when looking for a pi swap what all does that include?? i am not very good w/ tech things on cars. Am i lookin for the heads and cam or just one or the other?? What is a good price to be lookin for and what does something like that cost to install? Thanks guys
 

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!
Founding Member
Nov 29, 1999
5,520
1,291
224
H Town
Feb 25, 2009
#19
  • Feb 25, 2009
  • #19
syc_stang said:
you cant do a complete pi swap with only two grand. trust me it cost me closer to 3. just get some long tubes, off road x/h or catted and use your existing flos. i had 3:73s on my 00 gt and they were great over stock. i just bought a bbk lt and x pipe package from texas hot rods for 589 bucks with free shipping ( they are on a slight back order tho).

BBK 96-04 GT MUSTANG LONG TUBE HEADERS & OFF ROAD X PIPE PACKAGE
Click to expand...

you paid and arm and a leg for marginal peformance. . Did my first PI headswap in 2001 for $1300, labor included. You got hosed on the intake and porting cost. The stock PI intake is outsanding for NA cars in the 300rwhp range. It flows fine, doesn't get heak soaked.

As for you THR Parts, you won't get them. They are taking everybody right now, they are going out of business, or what it looks like. Many people are still waiting for 6 months for their parts, and don't get replies or they say they are on backorder. BTW, the bbk headers are not on backorder right now, I just checked with a local bbk dist.
 
4

4tun8

New Member
May 1, 2006
172
0
0
Classified
Feb 26, 2009
#20
  • Feb 26, 2009
  • #20
Mine is patriot stage 2 heads/cams and trickflow upper intake. Makes like 300ish to the wheels
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

2
new edge coolant leak need advice asap
  • 2vBoogs
  • Tuesday at 8:37 PM
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
93
1996 - 2004 SN95 Mustang -General/Talk- Thursday at 4:38 PM
Mustang5L5
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
323
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
T
Oil burning on my recently buil 302
  • The blk67
  • May 15, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
251
Fox 5.0 Mustang Tech May 15, 2026
Noobz347
S
Speedometer Calibration
  • Sonny Bibb
  • Sep 11, 2026
  • Digital Self-tuning Forum
Replies
4
Views
379
Digital Self-tuning Forum Sep 13, 2026
Sonny Bibb
S
L
Car has been overheating. Not sure what is causing it. Any help would be appreciated.
  • Luckysgirl
  • Jun 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
258
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
Luckysgirl
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?