hey real new to this forum but long story short i picked up a 2001 cobra that has a rod knock. i am planning on pulling the motor over the winter and putting pistons and rods and have the crank resurfaced along with doing the clutch and flywheel. this is what ive come up with so far. not real familiar with these cars so let me know if im in the right direction. i eventually want to supercharge it but only up to 8 lbs.
Pistons:Manley Platinum Series Forged Pistons
Rods: Scat Forged H-Beam Rods
Headstuds: APR Pro Series
Clutch: Ford Racing
Flywheel: Ford Racing
now im gonna do timing chains also but i havent picked out which ones to get yet. as for rod bearings im gonna let who ever takes the measurements get them. is there anything else that i should need? any and all imput will help out.
Pistons:Manley Platinum Series Forged Pistons
Rods: Scat Forged H-Beam Rods
Headstuds: APR Pro Series
Clutch: Ford Racing
Flywheel: Ford Racing
now im gonna do timing chains also but i havent picked out which ones to get yet. as for rod bearings im gonna let who ever takes the measurements get them. is there anything else that i should need? any and all imput will help out.