• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

2004 Tranny Problem!!!!!!!!!!!!!!

  • Thread starter Thread starter 04Comp_Org_GT
  • Start date Start date Aug 20, 2004

04Comp_Org_GT

Member
Feb 15, 2004
46
0
7
Terre Haute, IN
Aug 20, 2004
#1
  • Aug 20, 2004
  • #1
I dont have a grind just a severe clunk which I have been told by 2 dealers is normal. The real problem is: That the whole car shudders when driving between 55 and 65 in fifth gear. It only happens when I let off the gas and feels like the car is missing. I have 12000 miles on the car. I dont think it would be a miss because in only happens when the throttle is closed. Any ideas??
 

04Comp_Org_GT

Member
Feb 15, 2004
46
0
7
Terre Haute, IN
Aug 20, 2004
#2
  • Aug 20, 2004
  • #2
nobody???????
 

40th GT

New Member
Apr 7, 2004
916
0
0
Lawrenceville, GA
Aug 20, 2004
#3
  • Aug 20, 2004
  • #3
I have the same problem. I think all of us with the TR-3650 are gonna have to live with the clunk. Mine also has a severe clunk when i press the clutch pedal in 1st.
 
G

GregGTStang

New Member
Oct 17, 2003
240
0
0
Aug 20, 2004
#4
  • Aug 20, 2004
  • #4
Yeah, all the trannys clunk when putting it into first gear and going into second gear.....that is normal...Idk what you're talking about with the other problem.
 

04Comp_Org_GT

Member
Feb 15, 2004
46
0
7
Terre Haute, IN
Aug 20, 2004
#5
  • Aug 20, 2004
  • #5
yeah I know that all of these wonderful 3650's clunk, but I am more worried about the 5th gear thing. It seems like it does it more when the cruise in on.
The car kinda stutters around 55 mph. It just started doing it. As long as the engine is under load its ok, just when you let off.
 
S

smokin 04

New Member
Feb 2, 2004
94
0
0
TWO HARBORS, MN
Aug 20, 2004
#6
  • Aug 20, 2004
  • #6
Could it be a driveline vibration?? possibly from the driveshaft or rear end? Did you take it to the dealer yet? I had a F-150 in the shop with a similar problem, i found it had thrown the balancing weight off the driveshaft this caused a bad vibration between 55-70 mph. you could also check the drive shaft for any signs of being bent, look for any dents or dings in the driveshaft.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Aug 20, 2004
#7
  • Aug 20, 2004
  • #7
Mine lighly clunks SOMETIMES when switching into 1st or 2nd, but no problem with 5th at any speed or any other gear...trans shifts pretty darn good too, and if my seat is not too far back (for comfort) the I can pretty much always hit 3rd.Glad I got one with a good trans.BTW it has 4400 or so miles.
 

04Comp_Org_GT

Member
Feb 15, 2004
46
0
7
Terre Haute, IN
Aug 22, 2004
#8
  • Aug 22, 2004
  • #8
Just wanted to give an update on my problem: One of my buddies has a diablo programmer and he returned his car to stock and used it on mine and it fixed the Problem. After we figured out it was the computer I unhooked the battery for a while and it seems to have fixed the problem. I just thouight it was kind of wierd.
 

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
Aug 22, 2004
#9
  • Aug 22, 2004
  • #9
Have you read the 3650 thread yet to see if it sounds like the same problem? I had the fix done and so far so good. I didnt have any 5th gear problems though.

http://forums.stangnet.com/showthread.php?t=328655
 

04Comp_Org_GT

Member
Feb 15, 2004
46
0
7
Terre Haute, IN
Aug 22, 2004
#10
  • Aug 22, 2004
  • #10
2001 Geee T said:
Have you read the 3650 thread yet to see if it sounds like the same problem? I had the fix done and so far so good. I didnt have any 5th gear problems though.

http://forums.stangnet.com/showthread.php?t=328655
Click to expand...


yeah but they will not fix 2004s they say that they are already fixed.
Thanks, though I even showed the guy at the dealership the thread.
 
You must log in or register to reply here.

Similar threads

F
2004 Mustang GT – Fuel Pump Not Priming
  • Fayio
  • Apr 22, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
177
SN95 4.6L Mustang Tech Apr 27, 2026
n0v8or
N
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
237
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
K
Electrical 2000 GT Intermittent Engine Shutdown In Motion - DTC U1262
  • kenster1092
  • Apr 13, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
131
SN95 4.6L Mustang Tech Apr 24, 2026
squeak93
Drivetrain Rear end clunk
  • seanmahoney
  • Oct 13, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
385
SN95 4.6L Mustang Tech Oct 13, 2025
nickyb
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
183
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 21, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?