• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

3.73 installed. strange noise !!

  • Thread starter Thread starter r_suh
  • Start date Start date Sep 9, 2005
R

r_suh

New Member
Jun 22, 2005
17
0
0
Sep 9, 2005
#1
  • Sep 9, 2005
  • #1
i had 3.73 gears installed and i find that i am having to deal with a whining noise evertime i decelerate. i know this can't be normal and the mechanic that installed it said it might be a improperly installed shim.. would this be correct???
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
Sep 9, 2005
#2
  • Sep 9, 2005
  • #2
sounds like he is right. what type of gears are they?
 

rude_life

Member
Mar 30, 2005
372
0
16
Sep 9, 2005
#3
  • Sep 9, 2005
  • #3
Sounds like they were installed too tight. There isnt enough backlash. i think there is supposed to be between .08" and .015" of backlash. I think right in the middle is the desired recipe.
 
R

r_suh

New Member
Jun 22, 2005
17
0
0
Sep 9, 2005
#4
  • Sep 9, 2005
  • #4
94-302-vert said:
sounds like he is right. what type of gears are they?
Click to expand...
the gears are from a 88' F250 truck.. also am i losing any performance factors with this improperly installed shim???? or the install being too tight??
 

S/CBlack95GT

New Member
Apr 6, 2003
2,018
0
0
Tampa Palms, FL
Sep 9, 2005
#5
  • Sep 9, 2005
  • #5
r_suh said:
the gears are from a 88' F250 truck.. also am i losing any performance factors with this improperly installed shim???? or the install being too tight??
Click to expand...

They will just wear extremely fast. They need to be checked again.
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Sep 9, 2005
#6
  • Sep 9, 2005
  • #6
Stop driving NOW

Maybe you have not driven so much that if set up correctly, they won't whine forever.

Good Luck

Grady
 

5.0 from 95

Founding Member
Nov 6, 2001
738
0
0
Emory, TX
Sep 9, 2005
#7
  • Sep 9, 2005
  • #7
The last set I had installed were used and the mechanic told me that with used gears it should be about .012" and for a new set about .008". The new ones should end up at about .012" after they are run a while.


Paul
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Sep 9, 2005
#8
  • Sep 9, 2005
  • #8
Used gears

Were they FMS gears at least?

If not, the installer probably didn't check pinion depth and kept the stock shims on the pinion. Or he didn't measure backlash and a carrier shim kit needs to be purchased and shimmed correctly. Or he put too little or too much preload on the bearing spacer....Or he put the pain caps on backwards. Who knows? So many things can make gears whine when the installed doesn't have a brain.

Scott
 
R

r_suh

New Member
Jun 22, 2005
17
0
0
Sep 12, 2005
#9
  • Sep 12, 2005
  • #9
thanks for everyone's imput.. always appreciated when people answer back!!! thanks again.. well i guess my car is going back to the shop to get the gears fixed.. i've put about 10,000 kms on the gears already.. i mean the car still pulls hard but i know for sure that they should pull harder.. i'll probably change the gears to 4.10s.. but thats still a maybe.. hopefully i can get this fixed soon.. money is the only thing that holds me back!

by the way i put some pics up on my cardomain page..
http://www.cardomain.com/ride/2063603
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Sep 12, 2005
#10
  • Sep 12, 2005
  • #10
nice gotta love the blue........

sounds like the same as stated above.... shimmed improperly, i believe this is the reason my 4.10'S are coming out..


jason
 
R

r_suh

New Member
Jun 22, 2005
17
0
0
Sep 12, 2005
#11
  • Sep 12, 2005
  • #11
mytight95 said:
nice gotta love the blue........

sounds like the same as stated above.... shimmed improperly, i believe this is the reason my 4.10'S are coming out..


jason
Click to expand...
i love the blue.. i think its pretty rare to see a blue mustang.. i don't see very many blue GT's..
 
You must log in or register to reply here.

Similar threads

P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
173
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
553
Fox 5.0 Mustang Tech May 11, 2026
keel
D
96 get convertible-sell or part out?
  • DTCstang
  • May 17, 2026
  • What is it Worth?!?!?
Replies
5
Views
320
What is it Worth?!?!? May 18, 2026
nickyb
3.08 gears with a manual trans
  • limp
  • Aug 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
43
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 14, 2026
Qtrhrse23
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
262
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?