• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

4.30 too much for Nitrous?

  • Thread starter Thread starter jrobinsonchicag
  • Start date Start date Jun 4, 2008
J

jrobinsonchicag

New Member
Mar 21, 2008
23
0
0
Jun 4, 2008
#1
  • Jun 4, 2008
  • #1
Is 4.30 too steep for nitrous? I ask becasue I am afraid of the fuel puddling without the airflow at a high enough velocity in 1st and 2nd.

With the shift from first to second being so quick with the 4.30, I'm afraid the time between shifts will be enough to let the fuel puddle and the slow speeds in 1st and 2nd result it detonation. Any experience? Should I stick with my 4.10 or is it safe to switch to the 4.30?
 

bhuff30

Founding Member
Dec 11, 2001
6,037
35
129
Olathe KS
Jun 4, 2008
#2
  • Jun 4, 2008
  • #2
I don't see fuel puddling being a problem unless you are running a much bigger shot than you should or you are spray at way to low of an rpm to start with. You'll definately need a suspension that is well setup to hook nitrous in 1st gear with that kind of rear gear.
The difference from 4.10 to 4.30 is less than 5%. Do you really think it will make that much difference? .
I'd worry a lot more about the rpms crossing the stripe at the end of the quarter. You'll only be able to get to 102mph at 6000rpm with 4.30s. With 4.10s, you still run 4th gear out at 107mph.
 

Stan Weiss

Member
Dec 8, 2006
347
2
16
Philadelphia, PA
Jun 4, 2008
#3
  • Jun 4, 2008
  • #3
bhuff30 said:
I don't see fuel puddling being a problem unless you are running a much bigger shot than you should or you are spray at way to low of an rpm to start with. You'll definately need a suspension that is well setup to hook nitrous in 1st gear with that kind of rear gear.
The difference from 4.10 to 4.30 is less than 5%. Do you really think it will make that much difference? .
I'd worry a lot more about the rpms crossing the stripe at the end of the quarter. You'll only be able to get to 102mph at 6000rpm with 4.30s. With 4.10s, you still run 4th gear out at 107mph.
Click to expand...

To calculate exact RPM and MPH we would need to know how tall a tire he is running.
 

Tim2002GT

Founding Member
Apr 10, 2002
635
4
29
Tulsa, Oklahoma
Jun 4, 2008
#4
  • Jun 4, 2008
  • #4
With 4.10's on a 100 shot, I trapped 108.8 crossing the line at nearly 6000 rpm. I would recommend you stay with the 4.10's. If you are using a WOT switch, as long as you are letting off the gas when you shift, you won't be spraying between gears. Also, I would get a window switch to keep from engaging the nitrous below a safe rpm level. I don't spray until I hit 3500 rpm.

Side note, my car hooks pretty good in 1st with the spray. But I have 315 Nitto dr's and Steeda LCA's to help out!
 
You must log in or register to reply here.

Similar threads

  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
9
SN95 So i made me a Fozzy Locker
  • 98Mustang2017
  • Jun 1, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2018
98Mustang2017
9
Progress Thread Haven't posted in a looong time... rescuing another 'stang... '89 Vert
  • ChillPhatCat
  • May 20, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 1, 2023
joeballz83
J
Need Help, Car Wont Start, I've Gone Through Both Checklists
  • 93silverlx50
  • Jul 22, 2017
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
12K
Fox 5.0 Mustang Tech Apr 30, 2019
General karthief
O2 Sensors - How Do They Work And What Happens When They Don't
  • jrichker
  • Aug 22, 2016
  • Fox 5.0 Mustang Tech
Replies
0
Views
1K
Fox 5.0 Mustang Tech Aug 22, 2016
jrichker
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?