I grabbed a T5 off craigslist along with the clutch fork and bellhousing. I was able to find a pilot bearing that fit in the crank and around the shaft of the trans, but now when I go to slide the trans into the bellhousing/engine it sticks out by about 1/4". I've tried wiggling it, twisting it, and such for a good hour. I've even put the first few threads of the bolts in by hand and tried to guide it in, no luck. Is it possible that the trans is too long? Different size input shaft?
I see some people are running a 4cyl trans, did you guys have any issues?
I see some people are running a 4cyl trans, did you guys have any issues?