[SOLD]
Listed are Ford 5.0/302 roller lifter Valvetrain/Cam components including: lifter guide plates, guide plate retainers "spider", roller lifters, and pushrods. There are 16 roller lifters (+1 spare for a total of 17). I was actually collecting these parts for a 302 I was going to put in a 66 Mustang, but I no longer have the car. Take a look through the photos (below).
$85/lot buyer pays shipping from Springfield, VA (22152) or local pickup.
This includes:
New Hydraulic Lifter Guide Plates (qty 16) E5ZZ-6K512-A
New Lifter Guide Plate Retainer (qty 1) F0AZ-6C515-A (these are not pushrod guides)
New set of Sealed Power Pushrods (5/16") RP-3241
Used Ford Hydraulic Roller Lifters 5/5.8L (qty 17) M-6500-R302 (pulled from a running 5.0 L)
If you are starting out a new build and need some valvetrain components then this is a great way to go. If you just need one or two items then let me know and make a reasonable offer.
It is recommended that installers use some Loc-tite and new lifter guide-plate retainer bolts (1/4"-20 x 5/8") when installing. Take a look and let me know if you have any questions.
Pictures are of actual parts listed for sale.
Listed are Ford 5.0/302 roller lifter Valvetrain/Cam components including: lifter guide plates, guide plate retainers "spider", roller lifters, and pushrods. There are 16 roller lifters (+1 spare for a total of 17). I was actually collecting these parts for a 302 I was going to put in a 66 Mustang, but I no longer have the car. Take a look through the photos (below).
$85/lot buyer pays shipping from Springfield, VA (22152) or local pickup.
This includes:
New Hydraulic Lifter Guide Plates (qty 16) E5ZZ-6K512-A
New Lifter Guide Plate Retainer (qty 1) F0AZ-6C515-A (these are not pushrod guides)
New set of Sealed Power Pushrods (5/16") RP-3241
Used Ford Hydraulic Roller Lifters 5/5.8L (qty 17) M-6500-R302 (pulled from a running 5.0 L)
If you are starting out a new build and need some valvetrain components then this is a great way to go. If you just need one or two items then let me know and make a reasonable offer.
It is recommended that installers use some Loc-tite and new lifter guide-plate retainer bolts (1/4"-20 x 5/8") when installing. Take a look and let me know if you have any questions.
Pictures are of actual parts listed for sale.
Last edited: