• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

5.0 Has trouble starting...

  • Thread starter Thread starter irwinner
  • Start date Start date Feb 15, 2006

irwinner

New Member
Nov 27, 2005
2
0
0
Feb 15, 2006
#1
  • Feb 15, 2006
  • #1
The car in question is an 88 gt, the car has been sitting for some time with fuel stabilizer in it. Well we got the engine back together and tried to start the car it turns over quickly then seems to bog down then speeds up then bogs down again repeatedly and never starts, we have spark and fuel. Bad starter maybe? Or bad fuel?
 

craigwhite89gt

New Member
Oct 26, 2003
181
0
0
Cecil County Maryland
Feb 15, 2006
#2
  • Feb 15, 2006
  • #2
i had a problem similar..Intake gaskets was leaking very bad...but i could get it to run when the idle was up...jus my 2 cents
 
1

1SLO306

My 97 GTP owns you ALL!
Mar 31, 2005
904
1
17
Muhlenberg, ky
Feb 15, 2006
#3
  • Feb 15, 2006
  • #3
how long was it sittin??? have u tried to pull any codes??
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Feb 15, 2006
#4
  • Feb 15, 2006
  • #4
If its been sittin a while,yeah,gaskets do dry out,and rubber vaccum hoses get brittle..Did you change the fuel filter?
 

irwinner

New Member
Nov 27, 2005
2
0
0
Feb 15, 2006
#5
  • Feb 15, 2006
  • #5
Well the engine hasn't started for 1 year (took that long to get painted ) I think i'm going to get the gas tank cleaned out with a new fuel filter like you said since the gas might be bad. Intake gaskets shouldn't be leaking since they are new and I just installed them after a cam swap. But ill check that out too. Ill change the fuel filter tommorow to see if that helps out. Thanks for your suggestions.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Feb 15, 2006
#6
  • Feb 15, 2006
  • #6
irwinner said:
Well the engine hasn't started for 1 year (took that long to get painted ) I think i'm going to get the gas tank cleaned out with a new fuel filter like you said since the gas might be bad. Intake gaskets shouldn't be leaking since they are new and I just installed them after a cam swap. But ill check that out too. Ill change the fuel filter tommorow to see if that helps out. Thanks for your suggestions.
Click to expand...
yeah after a year of sitting any debri,dirt, would have alot of time to settle.I dont think the gas will be bad,especially if there was stablizer in it..The fuel filter mite be your ticket
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 15, 2006
#7
  • Feb 15, 2006
  • #7
If you press the gas pedal to the floor while (AND ONLY WHILE) cranking, it cuts the injectors. If you are fouling plugs or have a cranking fuel issue, doing this can help.

Good luck.
 
You must log in or register to reply here.

Similar threads

A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
595
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
518
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
N
Engine 86 GT no start/stall
  • nweber
  • Jul 28, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
278
Fox 5.0 Mustang Tech Jul 29, 2026
AeroCoupe
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
526
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
487
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?