60 ft times

LockNLoad · Nov 18, 2004

what is a good 60 foot time for a stock 99 mustang GT manual?

CanadaStang · Nov 18, 2004

I think if your running around 2.1's with the stock tires, your not doing too bad.

Erskine · Nov 18, 2004

i did a 2.018 in my stock 96gt but when i bought the car they came with kelly charger r/t, but i dont know if they are good are not

Go HoTO! · Nov 18, 2004

2.0 should be the goal...or better.

DerekStangGT · Nov 18, 2004

i ran a 2.0 with crappy Kuhmo 275s and 4.10s, but im not a great driver. i should be able to hit at least a 1.9, and a 1.8 with A LOT of practice. but my goal is consistent 1.9s

CManT1914 · Nov 18, 2004

DerekStangGT said:
i ran a 2.0 with crappy Kuhmo 275s and 4.10s, but im not a great driver. i should be able to hit at least a 1.9, and a 1.8 with A LOT of practice. but my goal is consistent 1.9s

I hate you..............

j/k I haven't been able to muster better than a 2.2, that was when the tires were new. NOW, ugh..... see sig... but I think 2.1's are pretty common for the 2V stangs. 2.0 is pretty good, and if you hit sub-2.0 you're pretty good at slipping that clutch!!

DerekStangGT · Nov 18, 2004

CManT1914 said:
I hate you..............

j/k I haven't been able to muster better than a 2.2, that was when the tires were new. NOW, ugh..... see sig... but I think 2.1's are pretty common for the 2V stangs. 2.0 is pretty good, and if you hit sub-2.0 you're pretty good at slipping that clutch!!

your suspension setup is great for handling, but kinda hurts you on the strip. you dont get as good weight transfer as i do with my stock springs.......plus your car just doesnt have the POWA!! lol

CManT1914 · Nov 18, 2004

DerekStangGT said:
your suspension setup is great for handling, but kinda hurts you on the strip. you dont get as good weight transfer as i do with my stock springs.......plus your car just doesnt have the POWA!! lol

Yea I know my springs are hurting me. As for that POWA comment. My car doesn't have the TRACTION!!! Chirping in 3rd SUCKS!!! lol. my tires aren't great, and neither is little river, as you well know. That's why I cant wait to get to SA next month and bust out with some mid to low 14's. Anyway, I'll put mine against yours in the turns ANY day and OWN you!!! lol

3ponyshow · Nov 19, 2004

Best I ran stock was a 2.1.

Darkhorse845 · Nov 19, 2004

Practice,Practice,Practice

DerekStangGT · Nov 19, 2004

CManT1914 said:
Anyway, I'll put mine against yours in the turns ANY day and OWN you!!! lol

i know so how is your suspension setup? i really like all that you have. hows handling and ride quality?

Steeda2004GT · Nov 19, 2004

1.91 on stock goodyears.

Cobra Jay · Nov 19, 2004

I've got a few 1.9's and lots of 2.0's & 2.1's on the stock $hitty GoodYear ZR's(@ 25 psi) and stock suspension.

DerekStangGT · Nov 19, 2004

GT JAY said:
I've got a few 1.9's and lots of 2.0's & 2.1's on the stock $hitty GoodYear ZR's(@ 25 psi) and stock suspension.

is 25 psi recommended for street radials?? ive always dropped mine to 20 psi

Cobra Jay · Nov 19, 2004

DerekStangGT said:
is 25 psi recommended for street radials?? ive always dropped mine to 20 psi

I was told to run them at 25.

When the track re-opens in April, I'll have a set of M/T Dr's out back.

No more runs on street tires for me.

decoy562 · Nov 19, 2004

The best I got was a 2.2, but I've only been to the track once so far

CManT1914 · Nov 19, 2004

DerekStangGT said:
i know so how is your suspension setup? i really like all that you have. hows handling and ride quality?

What's my setup? uh, I got the Eibach Pro Kit lowering springs, it's a 1.5" drop, and I also have the Eibach sway bars. My rear factory bar snapped at the bolt where it connects to the control arm. Don't ask me how. Then I have some KYB shocks/struts of some sort, Gas-Adjust or something like that. I also have some custom full length welded in subframe connectors with the seat brackets. They are freakin awesome. The handling is so much tighter and responsive now. Out on F.M. 2484 going towards my house there is this one curve I used to only be able to take at 60 mph. Since I did my SFC's I can take it @ 80+ no sweat!! They're nice, although the ride is not as smooth as it used to be if I'm on a real bad road. But any other time I really don't mind it, I kinda like the firm ride. I'll take you for a ride sometime so you can see how it rides and handles, I MIGHT even let you drive it!! lol

CManT1914 · Nov 19, 2004

GT JAY said:
I was told to run them at 25.

When the track re-opens in April, I'll have a set of M/T Dr's out back.

No more runs on street tires for me.

I've heard 20, but then again I've heard some people say it's completely useless to drop your pressure in street radials. I drop mine anyway.

Jackie Chan · Nov 19, 2004

Steeda2004GT said:
1.91 on stock goodyears.

trust me, if this guy can cut 1.9s anyone can

a well driven stang should cut 1.9s consistently. 1.8s with a great driver

Steeda2004GT · Nov 19, 2004

trust me, if this guy can cut 1.9s anyone can

Ya I was cutting a best of 2.4's and 2.3's before some tough love by John. . I want the 1.8 60' bad now.

60 ft times

New Member

New Member

New Member

New Member

My package is in the mail!

New Member

My package is in the mail!

New Member

Banned

My package is in the mail!

New Member

Member

My package is in the mail!

Member

New Member

New Member

New Member

I didn't read this.

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency