• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

8.8 Casting Number

  • Thread starter Thread starter 93lx308
  • Start date Start date Feb 17, 2018
9

93lx308

Member
Jan 12, 2018
24
7
13
Feb 17, 2018
#1
  • Feb 17, 2018
  • #1
Hey guys I just bought an 8.8 from a guy and he said it's from a 98 cobra. The casting number is FOZW-AAD. Does anyone know how to decode this?
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
4,061
3,134
204
Middle of Maine
Feb 17, 2018
#2
  • Feb 17, 2018
  • #2
How about a tag number. The casting number will only tell in what year it was cast, not necessarily in what year it was used in the assembly of the car. The "F0" would designate it was cast in 1990. I doubt that it sat on the shelf for 8 years before it was put into a car.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Feb 17, 2018
#3
  • Feb 17, 2018
  • #3
Did it have 5 lugs and cobra brakes?
 
9

93lx308

Member
Jan 12, 2018
24
7
13
Feb 17, 2018
#4
  • Feb 17, 2018
  • #4
I was bummed out when I got it didn't have a tag on it. But I did some research and read that they changed from a tag to a sticker on the axle tube. Unfortunately most of the sticker is not legible. The only thing I can read is "209E". However the caliper brackets do say "cobra" on them
 
9

93lx308

Member
Jan 12, 2018
24
7
13
Feb 17, 2018
#5
  • Feb 17, 2018
  • #5
billison said:
Did it have 5 lugs and cobra brakes?
Click to expand...
Yes it is 5 lug and reads "cobra" on the brakes
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,478
1,349
173
Feb 17, 2018
#6
  • Feb 17, 2018
  • #6
Cobra Brakes swapped to Fox rear end?
 
F

FoxChasis

20+ Year Stangneter
Dec 23, 2003
590
277
93
Feb 18, 2018
#7
  • Feb 18, 2018
  • #7
F0ZW-AAD = originally engineered for 1990 (F0) Mustang (Z), Axle and Driveshaft engineering department (W), release level AAD

There is a date code cast into the differential also and that will tell you when the housing was actually cast.
 
Reactions: 93lx308 and RangerJoe

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Feb 18, 2018
#8
  • Feb 18, 2018
  • #8
Technically, of you took an 8.8 rear from a 1986, and put disk brakes from a 1998 cobra on it, it would be pretty difficult to tell it apart from a true 1998 cobra rear.

At that point you are looking at hardware to see if it was factory installed or looks like someone installed it after the fact.


F0zw would suggest a 1990 rear axle
 
9

93lx308

Member
Jan 12, 2018
24
7
13
Feb 18, 2018
#9
  • Feb 18, 2018
  • #9
FoxChasis said:
F0ZW-AAD = originally engineered for 1990 (F0) Mustang (Z), Axle and Driveshaft engineering department (W), release level AAD

There is a date code cast into the differential also and that will tell you when the housing was actually cast.
Click to expand...
Thanks! And where is the date code located? I found the first casting number on the front of the center on the opposite side the fill plug hole.
 
9

93lx308

Member
Jan 12, 2018
24
7
13
Feb 18, 2018
#10
  • Feb 18, 2018
  • #10
Mustang5L5 said:
Technically, of you took an 8.8 rear from a 1986, and put disk brakes from a 1998 cobra on it, it would be pretty difficult to tell it apart from a true 1998 cobra rear.

At that point you are looking at hardware to see if it was factory installed or looks like someone installed it after the fact.


F0zw would suggest a 1990 rear axle
Click to expand...
The hardware looks oem from what I can tell. And when you turn one axle by hand, the other turns the same way telling me that it also does have the trak-lok carrier.

The rear end came complete with calipers rotors pads brake lines, etc but for now I'm just gonna run my drums and 4 lug axles until I get sn95 front brakes/spindles/hubs to eventually swap to 5 lug and new master cyl. And proportioning valve. Still researching what is involved with that now.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Feb 18, 2018
#11
  • Feb 18, 2018
  • #11
Check the fox tech for the how to/tech theads, there is stuff in there about 5 lug swaps that will tell ya what you need to know
 
Reactions: 93lx308
F

FoxChasis

20+ Year Stangneter
Dec 23, 2003
590
277
93
Feb 18, 2018
#12
  • Feb 18, 2018
  • #12
Date code is in the same area, or maybe on the other side. It's a Julian date so no letter like in other 'normal' Ford date codes.
 
Reactions: 93lx308
9

93lx308

Member
Jan 12, 2018
24
7
13
Feb 18, 2018
#13
  • Feb 18, 2018
  • #13
Thanks guys! Worked on getting the 7.5 out today. That thing hasn't been touched since ford! Worst diff fluid I've ever seen, brown and chunky. Looks like the brake lines will bolt right onto the 8.8 perfect from what I can tell, to use the drums for now.
 
F

FoxChasis

20+ Year Stangneter
Dec 23, 2003
590
277
93
Feb 23, 2018
#14
  • Feb 23, 2018
  • #14
Find the date code?
 
You must log in or register to reply here.

Similar threads

W
2016 Mustang GT fuel tank leak
  • Waynetk16
  • Oct 8, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
132
2015 - 2023 (S550) Mustang -General/Talk Oct 9, 2026
gkomo
H
97 cobra maf sensor help
  • Hopper1979
  • Oct 16, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
155
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
CAMTWO1070
9
Engine 2.3 fox body upgrades from sn95
  • 92ponyboy
  • Feb 20, 2026
  • 2.3L (N/A & Turbo) Tech
Replies
4
Views
523
2.3L (N/A & Turbo) Tech Apr 25, 2026
NXcoupe
N
R
19 GT Window Motor Saga
  • Rcdgl
  • Oct 11, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
0
Views
107
2015 - 2023 (S550) Mustang -General/Talk Oct 11, 2026
Rcdgl
R
M
How To Decode
  • Malcoll1
  • Mar 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
420
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 10, 2026
FoxChasis
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?