I just put in my 8.8 that I had built out of the car. It has 11.65" brakes on it with Ranger axles (used ones unfortunately) and North Cobra brackets. I also have the Ford moan braces. It replaced a 7.5" with drum brakes. I DO have a slight moan at low speeds under not-so-hard braking. I was expecting that. But, my problem is the same noise occurs when not braking, and making sharp right-hand turns about 20 mph... And whereas the moan is constant, i.e. hmmmmmmmmmm, the turning noise is over-and-over, i.e. hmmmmm hmmmmm, but it doesnt seem perfectly regular. The axle assembly has all new parts except for the axles. I ran out of money. While I was assembling the axle, I had problems with axle flange runout, because of the disc brakes, and had to get another axle, but that was on the right side. Both noises seem to come from the left side...
Please help, I don't want to touch it unless I know what I'm going after...
Please help, I don't want to touch it unless I know what I'm going after...