Will entertain trades for a good transportation car!!
I have a 1987 5.0 LX Vert that I am thinking of selling if there's any interest.
This car has never seen snow, as evidenced by the lack of rust on the under carriage. The body is in excellent condition, however the hood has one small dent, where some idiot closed the hood on a tool. The paint is a pearlescent white, with a new black top. Car has 83,000 miles on it, Here are the mods...
*Kenne Bell 1.5 supercharger with only 2,500 miles on it
*90mm LMAF, 255 lph pump, 42# injectors
*Stock block, heads with 1.7 Cobra roller rockers
*Ceramic shorty headers to o/r H-pipe, 2 1/2 to Hooker maxflow mufflers and out 2 1/2" Flowmaster tail pipes
*Accel 300+ ignition and coil
*AIS trunk mount Methanol injection system
*2200 stall non-lock converter, built AOD Silverfox manual/auto valvebody with OD lockout switch, Hammer shifter
*B&M supercooler
*3.55 FRPP reag gears, Detroit Tru-Trac differential, axle girdle cover
*MM Subframe connectors, MM G-load brace, FRPP front lower control arms,
MM Caster/Camber plates
*Koni Sport springs, Koni Str.t struts and shcoks, Gabriel Quad shocks
*FRPP upper rear control arms, J&M poly ball lower control arms.
*Tuned with included Quaterhorse/ Binary editor
NVM Going into storage
I have a 1987 5.0 LX Vert that I am thinking of selling if there's any interest.
This car has never seen snow, as evidenced by the lack of rust on the under carriage. The body is in excellent condition, however the hood has one small dent, where some idiot closed the hood on a tool. The paint is a pearlescent white, with a new black top. Car has 83,000 miles on it, Here are the mods...
*Kenne Bell 1.5 supercharger with only 2,500 miles on it
*90mm LMAF, 255 lph pump, 42# injectors
*Stock block, heads with 1.7 Cobra roller rockers
*Ceramic shorty headers to o/r H-pipe, 2 1/2 to Hooker maxflow mufflers and out 2 1/2" Flowmaster tail pipes
*Accel 300+ ignition and coil
*AIS trunk mount Methanol injection system
*2200 stall non-lock converter, built AOD Silverfox manual/auto valvebody with OD lockout switch, Hammer shifter
*B&M supercooler
*3.55 FRPP reag gears, Detroit Tru-Trac differential, axle girdle cover
*MM Subframe connectors, MM G-load brace, FRPP front lower control arms,
MM Caster/Camber plates
*Koni Sport springs, Koni Str.t struts and shcoks, Gabriel Quad shocks
*FRPP upper rear control arms, J&M poly ball lower control arms.
*Tuned with included Quaterhorse/ Binary editor
NVM Going into storage