88dual Exhaust

Ghostrider59 · Sep 26, 2014

Going to dual exhaust on my 88 lx.Have read about rear brake problems when adding duals
Do I need to worry about this on my 88??

Mustang5L5 · Sep 26, 2014

Assume you have 4-cylinder Mustang?

Then yes, if you convert to dual exhaust using a 5.0 cat back, the brake line will run very close to the passenger side exhaust piping.

7991LXnSHO · Sep 26, 2014

Is it a problem some heat shield wrap will not fix?

Ghostrider59 · Sep 26, 2014

Car is currently a 351 Windsor. Not sure what motor was in it
I just bought the car recently, looks like it had duals at one time as i'm seeing old brackets for exhaust.

CarMichael Angelo · Sep 27, 2014

Ghostrider59 said:
Car is currently a 351 Windsor. Not sure what motor was in it
I just bought the car recently, looks like it had duals at one time as i'm seeing old brackets for exhaust.

Somebody went to the trouble to swap in a 351W, and installed a single exhaust on it? If so, how big is the current single exhaust?

Ghostrider59 · Sep 27, 2014

Car had dual exhaust, exited in front of rear wheels. I want to exit in the stock location. Concerned about the brake hose issue.

stykthyn · Sep 27, 2014

If you have stock hangars then you will be fine.

FoxMustangLvr · Sep 27, 2014

Just do it!

Ghostrider59 · Sep 29, 2014

Got the old manifolds off tonite.Now we're ready for some headers,any suggestions ?I am thinking BBK swap headers. What's the consensus ?

elarm1 · Sep 29, 2014

Yup, Just like @FoxMustangLvr said.... Do ETTT!

Ghostrider59 · Sep 29, 2014

elarm1 said:
Yup, Just like @FoxMustangLvr said.... Do ETTT!

Planning exhaust, just need some advice on what to buy.

stykthyn · Sep 30, 2014

Well if you are running a 351 you will need some swap headers. I've never had issues with bbk headers abd they are pretty affordable

Ghostrider59 · Sep 30, 2014

Here's the plan. Bbk headers, Bbk x pipe, dynomax vt mufflers, stock tailpipes. All in 2 1\2 except 1 5\8 primary tubes.

FoxMustangLvr · Sep 30, 2014

^^^^To long tube or not to long tube, that is the question.

Ghostrider59 · Sep 30, 2014

Thinking shorties would be less trouble.Hope I'm right.

Ghostrider59 · Sep 30, 2014

Ok looking at BBK 1511 headers for 351 windsor 79 thru 93. Are they gonna fit right ?

Ghostrider59 · Oct 4, 2014

Picked up an x pipe ,now for headers BBK or Macs ?

stykthyn · Oct 4, 2014

Stay away from Mac

85rkyboby · Oct 4, 2014

^^x's 2

Ghostrider59 · Oct 4, 2014

So Mac's arent good?

88dual Exhaust

Member

That is…until I whipped out my Bissell

wanna catch the space herp

Member

my rearend will smell so minty fresh,

Member

I want to measure mine. It doesn't look that tall.

I love my Pimp

Member

Member

I want to measure mine. It doesn't look that tall.

Member

I love my Pimp

Member

Member

Member

I want to measure mine. It doesn't look that tall.

Active Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency