• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

92 GT no start

  • Thread starter Thread starter CMG92GT
  • Start date Start date Oct 27, 2008
C

CMG92GT

New Member
Oct 3, 2008
4
0
0
Pembroke Pines Florida
Oct 27, 2008
#1
  • Oct 27, 2008
  • #1
92 GT no start.
I have spark, fuel pump works but does not prime I have to tap the relay to start pump and it stays on. I have more than enough psi to run the car, but the injectors do not fire. I pulled a connector checked an old injector, no click or puffs of air. I can't pull any codes from the computer I changed the battery right before this happened so I'm getting 00 on the reader. Has anyone ever had this happen? How did you fix it?
Thanks Chris
 
S

scld1354

Member
Mar 1, 2006
41
0
7
Oct 27, 2008
#2
  • Oct 27, 2008
  • #2
So it doesnt prime with the key in the "on" position, and the only way you can get it to run is when you jump it via the test port under the hood?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 28, 2008
#3
  • Oct 28, 2008
  • #3
Check for 12 volts [with the key-on] to the injector connectors. They get accessory 12 volts and a pulsed ground.

If you have 12 volts but no pulsed ground, check your TPS sig return to be sure it's around 1.0 volt.

And of course, see JRichker's Cranks but no start checklist.

Good luck.
 
C

CMG92GT

New Member
Oct 3, 2008
4
0
0
Pembroke Pines Florida
Oct 28, 2008
#4
  • Oct 28, 2008
  • #4
scld I've never tried to jump the fuel pump from the test port, I'am not even sure how to do that.

HISSIN, I will check both voltage readings and see if I get those numbers.

Thanks Chris
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Oct 30, 2008
#5
  • Oct 30, 2008
  • #5
Have u tryed another relay?tapping on relay shouldnt make any changes
 
You must log in or register to reply here.

Similar threads

S
92 5.0 almost starts
  • Steverino
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
272
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 25, 2026
General karthief
N
Engine 86 GT no start/stall
  • nweber
  • Jul 28, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
274
Fox 5.0 Mustang Tech Jul 29, 2026
AeroCoupe
D
1989 mustang 5.0 crank no start
  • Darkstang302
  • Tuesday at 3:24 PM
  • Fox 5.0 Mustang Tech
Replies
7
Views
129
Fox 5.0 Mustang Tech Yesterday at 8:36 PM
AeroCoupe
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
589
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
516
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?