93 Cobra 10 Pin Connector Wire Colors

So I made a rookie mistake tonight. I've been in the process of rebuilding the top end on my 93 Cobra and I decided to delete the salt and pepper shakers. I de-pinned the connectors but after doing so I realized that the wire colors are not consistent on the white connectors. Does anyone have pictures of the wire colors going to either side of the white connector?

I matched all the wires up and I have an grayish wire coming from the chassis side of the harness and a green/brn(or red) on the engine side. Before I go and pull the whole harness apart can anyone help? I have a feeling they are all mixed up on this connector. ugh.
 
  • Sponsors (?)


May not be cobra specific, but possibly 1993 specific. Unfortunately that’s the only EVTM I don’t have.

Solid gray wire from ECU side? I’ll check on my ‘88 in a few.
 
As you can see in the pictures I have this loan grayish wire and 3 what looks to be green with a red or brown stripe... wth?


20200130_174735.jpg 20200130_174744.jpg 20200130_174748.jpg