hsean 10 Year Member Jul 24, 2006 656 69 69 dearborn,michigan May 12, 2010 #1 May 12, 2010 #1 any idea where i can buy the upper intake to lower intake bolts my ford dealer doesn't have them.do they make them in stainless steel?
any idea where i can buy the upper intake to lower intake bolts my ford dealer doesn't have them.do they make them in stainless steel?
50foxbody Member Jan 4, 2009 218 0 16 May 12, 2010 #2 May 12, 2010 #2 when i did it on my 90 i had to go to lowes i think its an 8" bolt but they only had 9 so i had to make a spacer good luck hope that helps
when i did it on my 90 i had to go to lowes i think its an 8" bolt but they only had 9 so i had to make a spacer good luck hope that helps
Beasty306GT Active Member Dec 19, 2002 671 4 28 Oxford,Mass May 12, 2010 #3 May 12, 2010 #3 order some from ARP
hsean 10 Year Member Jul 24, 2006 656 69 69 dearborn,michigan May 12, 2010 #4 May 12, 2010 #4 SickSix said: order some from ARP Click to expand... thanks i am going to check them out and see if they possibly have the spacer as well.
SickSix said: order some from ARP Click to expand... thanks i am going to check them out and see if they possibly have the spacer as well.
R ricker6869 New Member Sep 5, 2007 10 0 0 May 13, 2010 #5 May 13, 2010 #5 The longest bolt needed is a pair of 5/16-18 thread in 6.75". Common hardware sizing is 6" and 8". A 7" will work...but you will need to order it from a fastner company. Goodluck
The longest bolt needed is a pair of 5/16-18 thread in 6.75". Common hardware sizing is 6" and 8". A 7" will work...but you will need to order it from a fastner company. Goodluck